SPEEDAIRE
SPEEDAIRE 2YNN3 Exhaust Muffler 0.75 in NPT 160 cfm 300 psi
Reduces exhaust noise and removes oil mist at up to 160 cfm and 300 psi with a 0.75 in NPT inlet and 0.9 micron filtration
- Removes oil mist down to 0.9 micron for cleaner exhaust air
- Handles up to 160 cfm flow rate to match high-demand compressors
- Rated for 300 psi maximum pressure for heavy-duty pneumatic systems
- 75 in NPT inlet fits standard three-quarter inch air lines directly
- Aluminium and polypropylene body resists corrosion and withstands 160 °F operating temperature
SPEEDAIRE 2YNN3 Exhaust Muffler
The SPEEDAIRE 2YNN3 is an exhaust muffler designed to remove oil mist from compressed air systems. It handles a maximum flow rate of 160 cfm and a maximum operating pressure of 300 psi. The unit filters particles down to .9 micron using an aluminum and polypropylene body. It is intended for industrial pneumatic applications requiring clean exhaust air.
Check thread size and flow capacity
Verify that your existing air line uses a .75 in NPT connection to match the single air inlet on this muffler. Confirm the system pressure does not exceed 300 psi and that the flow demand stays within 160 cfm. Ensure the operating temperature remains below 160 Degrees F for proper function. The filter targets oil mist only, not solid particulates or water vapour.
Oil‑mist filtration improves exhaust quality
The integrated filter element captures oil mist at a .9 micron rating, reducing contamination in the exhausted air. This helps protect downstream equipment and maintains a cleaner work environment. The aluminum and polypropylene construction resists corrosion from compressed air condensate. No additional accessories or software are included with the muffler.
Highlights
- Removes oil mist down to 0.9 micron for cleaner exhaust air
- Handles up to 160 cfm flow rate to match high-demand compressors
- Rated for 300 psi maximum pressure for heavy-duty pneumatic systems
- 75 in NPT inlet fits standard three-quarter inch air lines directly
- Aluminium and polypropylene body resists corrosion and withstands 160 °F operating temperature
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What comes with the SPEEDAIRE 2YNN3 muffler and what must be purchased separately?
The muffler body is supplied ready to install. No additional fittings, brackets or filter elements are included, so any required NPT adapters or mounting hardware must be sourced separately.
How do I choose between the listed flow and pressure ratings for my compressor?
Match the compressor output to the muffler’s 160 cfm maximum flow and 300 psi maximum operating pressure; if your unit exceeds either figure, select a higher-capacity silencer instead.
What does the 0.9 micron filter rating mean once the muffler is installed on a running compressor?
It indicates the element captures oil mist particles down to 0.9 micron, so exhaust air leaving the muffler carries significantly less oil aerosol than an unfiltered outlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
