SPEEDAIRE
SPEEDAIRE 22KE01 Pressure Washer Hose 3/8 in 30 ft 3000 psi
30 ft pressure washer hose rated 3000 psi with 3/8 in MNPT fittings and 0 to 250 °F range
- 30 ft reach covers large areas without moving the unit
- 3000 psi rating handles demanding cleaning tasks
- 3/8 in bore maintains strong flow at full pressure
- Rubber cover resists abrasion and weather from 0 to 250 °F
- Malleable iron MNPT fittings on both ends ensure secure connections
3/8 in 30 ft pressure washer hose
This SPEEDAIRE hose is a coupled assembly built for pressure-washer connections. It carries a 3,000 psi maximum working pressure at 70 °F with a 4:1 safety factor. The 30 ft length suits mobile cleaning tasks where reach matters. Both ends terminate in 3/8 in MNPT malleable-iron fittings for direct attachment.
Sustained pressure and temperature behaviour
Rated for continuous use from 0 °F to 250 °F, the polyethylene tube and rubber cover maintain integrity across the full range. The 4:1 safety factor means the burst threshold is four times the 3,000 psi working limit, providing margin during prolonged trigger-down operation. Black rubber resists UV exposure during outdoor storage.
Compatibility checks before ordering
Verify that your pressure washer and gun accept 3/8 in MNPT threads on both ends. Confirm the machine’s rated pressure does not exceed 3,000 psi at 70 °F. Ensure the 0.71 in outside diameter clears any hose guides or reels on your cart. Check that the operating environment stays within the 0 °F to 250 °F window.
Highlights
- 30 ft reach covers large areas without moving the unit
- 3000 psi rating handles demanding cleaning tasks
- 3/8 in bore maintains strong flow at full pressure
- Rubber cover resists abrasion and weather from 0 to 250 °F
- Malleable iron MNPT fittings on both ends ensure secure connections
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How hot does the 30 ft SPEEDAIRE 22KE01 hose get when run at 3000 psi all day?
The hose is rated for a temperature range of 0 to 250 degrees F at a maximum working pressure of 3000 psi at 70 degrees F, so surface heat will stay within that band during continuous use.
What fittings must my pressure washer and gun already have to connect this 3/8 in MNPT hose?
Both ends of the 22KE01 are 3/8 in male NPT threads on malleable iron fittings, so the washer outlet and gun inlet need matching 3/8 in female NPT ports.
Will the 30 ft black rubber-covered hose stay flexible in cold weather alongside my older steel-braid hose?
The polyethylene tube and rubber cover are rated down to 0 degrees F, so the SPEEDAIRE 22KE01 remains pliable in conditions where older steel-braid hoses can stiffen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
