SPEEDAIRE
SPEEDAIRE 21AC08 air compressor 9000 SPM 8 CFM
Air-powered reciprocating saw delivers 9000 strokes per minute at 8 CFM for general-duty cutting
- Cuts fast with 9000 strokes per minute
- Orbital stroke clears material on every pass
- Variable speed trigger gives control for any job
- Light 1.5 lb design reduces fatigue during use
- Runs on 8 CFM air supply at 90 psi
SPEEDAIRE 21AC08 Air Saw
The SPEEDAIRE 21AC08 is an air-powered reciprocating saw built for general-duty cutting tasks. It delivers up to 9000 strokes per minute using 8 cfm of air at 90 psi through a 1/4 in NPT female inlet. The tool weighs 1.5 lb and includes a 24T blade plus 2 mm and 4 mm hex keys for quick changes.
Suited for air-line workshops; not for cordless jobs
Technicians with a compressed-air system supplying at least 8 cfm at 90 psi will find the saw ready for sheet metal, plastic or light fabrication work. The adjustable shoe and orbital stroke help control the cut in thin materials. Buyers without an existing compressor and 3/8 in minimum hose should look at electric or battery alternatives.
Sustained cutting at 90 psi
Under continuous load the saw maintains its 9000 SPM rate as long as the air supply meets the 8 cfm demand. The 3/8 in stroke length and orbital action keep material removal steady without the torque drop-off seen in short bursts. Variable-speed trigger control lets the operator ease into a cut and hold a consistent pace through longer runs.
Highlights
- Cuts fast with 9000 strokes per minute
- Orbital stroke clears material on every pass
- Variable speed trigger gives control for any job
- Light 1.5 lb design reduces fatigue during use
- Runs on 8 CFM air supply at 90 psi
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What air supply do I need to run this 9000 SPM air saw at its rated 8 CFM?
You need a compressor that can deliver 8 CFM at 90 psi with a 3/8 in hose and a 1/4 in NPT female inlet on the tool.
Will my existing 1/4 in NPT air fittings and 3/8 in hose work with this 8 CFM reciprocating saw?
Yes, the saw uses a 1/4 in NPT female inlet and the minimum hose size is 3/8 in, so standard fittings and hose of that size will connect directly.
How can I confirm the saw is reaching its 9000 strokes per minute after I connect it?
Set the regulator to 90 psi, pull the variable-speed trigger fully, and listen for the maximum orbital stroke rate; the included 24T blade should cut smoothly without stalling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
