SPEEDAIRE
SPEEDAIRE 21AA69 Air Drill 3/8 in 2600 RPM 16 CFM
Air-powered pistol drill delivers 2600 RPM free speed and 3.90 ft-lb torque at 90 psi
- High free speed of 2600 RPM for fast drilling
- Full-load airflow of 16 CFM delivers strong cutting power
- Lightweight 2.4 lb composite body reduces operator fatigue
- Planetary gear train provides smooth torque delivery
- Trigger throttle gives precise speed control
SPEEDAIRE 21AA69 Air Drill 3/8 in
The SPEEDAIRE 21AA69 is a pistol-grip air drill built for mechanics and fabricators who need a lightweight tool for drilling and fastening. It runs on compressed air at 90 psi and delivers a free speed of 2600 RPM with 3.90 ft-lb of torque. The composite housing keeps the weight down to 2.4 lb for extended use.
Installation and common issues
Connect the drill to a 3/8 in minimum hose using a standard quick-connect fitting and set the regulator to 90 psi. The trigger throttle gives direct speed control without a variable-speed mechanism. The most common issue is pressure drop from undersized hose or long runs, which cuts torque and lowers the effective RPM below the rated 2600.
Check your compressor and supply
Verify your compressor can sustain 16 CFM at full load and 4.00 CFM average during a 15 second run time at 90 psi. Ensure the air line is at least 3/8 in internal diameter all the way to the tool. This drill is not suited for buyers who need variable speed control or a right-angle head for tight corners.
Highlights
- High free speed of 2600 RPM for fast drilling
- Full-load airflow of 16 CFM delivers strong cutting power
- Lightweight 2.4 lb composite body reduces operator fatigue
- Planetary gear train provides smooth torque delivery
- Trigger throttle gives precise speed control
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How do I confirm the drill is running at the rated 2600 RPM free speed after hooking it up?
Supply 90 psi at the inlet, pull the trigger with no load, and listen for smooth, steady operation at full throttle.
What comes in the box and what must I supply separately?
The drill itself is included; you must provide a 3/8 in minimum hose, an air compressor capable of 16 CFM at 90 psi, and suitable fittings.
Which SPEEDAIRE 21AA69 variant should I choose for my application?
Only the 3/8 in, 2600 RPM, 16 CFM model with planetary gear train and composite housing is offered under this part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
