SPEEDAIRE
SPEEDAIRE 20Z884 In-Line Lubricator 1/4 in NPT 36 cfm 200 psi
Adds metered oil mist to compressed-air lines through a 1/4 in NPT aluminium body rated for 36 cfm at 200 psi
- Delivers consistent mist lubrication for pneumatic tools
- 36 cfm maximum flow rate supports high-demand air lines
- 200 psi operating pressure handles heavy-duty compressor output
- Aluminium body resists corrosion in workshop environments
- 8 mm compact width fits tight piping layouts
In-Line Lubricator 1/4 in NPT
The SPEEDAIRE 20Z884 is an in-line compressed air lubricator built for pneumatic systems. It delivers a mist-type feed through a 1/4 inch NPT female inlet and male outlet. Rated for 36 cfm at 200 psi, it suits air tool lines and general shop supply. The aluminum body and bowl withstand temperatures up to 200 degrees F.
Suited for fixed 1/4 in lines
This unit fits installations that require left-to-right flow on a 1/4 inch NPT circuit. It works where a screwdriver-adjustable mist feed is acceptable and no sight dome or gauge is needed. Builders needing higher flow, larger ports, visual oil monitoring or reverse flow direction should look at other models.
36 cfm capacity with 200 psi headroom
The lubricator comfortably handles standard shop tools and actuators within its 36 cfm rating. It maintains lubrication up to the 200 psi pressure limit and 200 degrees F temperature limit. Beyond that flow or pressure range, oil delivery becomes inconsistent and the aluminum housing reaches its design boundary.
Highlights
- Delivers consistent mist lubrication for pneumatic tools
- 36 cfm maximum flow rate supports high-demand air lines
- 200 psi operating pressure handles heavy-duty compressor output
- Aluminium body resists corrosion in workshop environments
- 8 mm compact width fits tight piping layouts
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What thread size must my existing air line have to connect to the 1/4 in NPT inlet?
The inlet uses a 1/4 in NPT female thread, so your hose or fitting needs a matching 1/4 in NPT male connection.
Will the 36 cfm maximum flow rate restrict tools that need less air than that?
No, the lubricator handles up to 36 cfm, so any tool drawing less flow will work without restriction.
How can I confirm oil is reaching the air stream after I install it?
Turn the screwdriver adjustment while air flows; a fine mist should appear at the tool exhaust when the setting is correct.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
