SPEEDAIRE
SPEEDAIRE 1WG50 Compressor Oil 1 qt Bottle ISO 100
ISO 100 mineral compressor oil for reciprocating compressors, viscosity index 97, flash point 257 °C, 1 qt bottle
- ISO 100 viscosity matches reciprocating compressor specs
- Viscosity index 97 keeps oil stable across temperatures
- Mineral base oil lubricates moving parts effectively
- Flash point 257 °C reduces fire risk during operation
- One-quart bottle simplifies top-ups and routine maintenance
ISO 100 compressor oil for reciprocating units
This SPEEDAIRE mineral-base oil comes in a one-quart bottle rated at ISO viscosity grade 100 with a viscosity index of 97. It is formulated for use in reciprocating air compressors and vacuum pumps where the manufacturer specifies a 100-grade lubricant. The fluid is not food-grade and carries a flash point of 257 degrees Celsius.
Verify compressor manual for ISO 100 requirement
Before ordering, confirm that your reciprocating compressor calls for an ISO 100 mineral oil and that the sump capacity matches a one-quart top-up or fill. Check that the equipment is not designated for food-grade lubricants, as this product is not approved for such service. Ensure the operating temperature range of your machine aligns with the oil's viscosity profile at 40 and 100 degrees Celsius.
Mineral base with 257 °C flash point
In normal service the oil exhibits a kinematic viscosity of 113.6 cSt at 40 °C and 11.5 cSt at 100 °C, providing stable film strength across typical compressor discharge temperatures. The high flash point of 257 °C reduces volatility and carbon deposit formation during extended run cycles. Mineral base stocks generally produce moderate vapour pressure, so oil carry-over into the air stream remains low under standard operating loads.
Highlights
- ISO 100 viscosity matches reciprocating compressor specs
- Viscosity index 97 keeps oil stable across temperatures
- Mineral base oil lubricates moving parts effectively
- Flash point 257 °C reduces fire risk during operation
- One-quart bottle simplifies top-ups and routine maintenance
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What comes in the box and is anything else needed to use this oil?
One 1-quart bottle of SPEEDAIRE ISO 100 compressor oil is supplied. No extra parts are required; simply pour it into a compatible reciprocating compressor.
How do I know ISO 100 is the right viscosity grade for my compressor?
Choose ISO 100 when the manufacturer specifies that grade. Its viscosity is 113.6 cSt at 40 °C and 11.5 cSt at 100 °C, with a viscosity index of 97.
What does the 257 °C flash point mean for daily operation?
The oil will not ignite until 257 °C, so it remains stable at normal compressor discharge temperatures and reduces fire risk during heavy use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
