SPEEDAIRE
SPEEDAIRE 1WG49 compressor oil 1 qt bottle ISO 100
Synthetic ISO 100 compressor oil in a 1 qt bottle for R-Series compressor pumps
- Synthetic base oil resists thermal breakdown
- ISO 100 viscosity grade matches R-Series pump specs
- High 249 °C flash point improves operating safety
- Viscosity index 97 keeps film strength across temperatures
- One-quart bottle sized for convenient top-ups
SPEEDAIRE 1WG49 ISO 100 Compressor Oil
This synthetic compressor oil is formulated for R-Series compressor pumps. It comes in a one-quart bottle and carries an ISO viscosity grade of 100. The fluid suits maintenance technicians and shop operators who service compatible reciprocating units. It is not food grade and is restricted from sale in certain states.
Synthetic Base Oil for R-Series Pump Compatibility
The synthetic base oil delivers a viscosity index of 97 for stable performance across temperatures. At 40°C the kinematic viscosity measures 96.4 cSt, dropping to 9.3 cSt at 100°C. A flash point of 249°C adds a high-temperature safety margin. This product does not fit pumps requiring food-grade lubricants or different viscosity grades.
One-Quart Volume for Routine Top-Ups and Changes
The one-quart container covers typical sump refills and periodic top-ups on R-Series pumps. It provides enough fluid for standard drain intervals on smaller capacity reservoirs. Shops running multiple large-capacity units or extended service intervals will need additional bottles. The oil is not intended for vacuum pumps or rotary screw compressors outside the R-Series range.
Highlights
- Synthetic base oil resists thermal breakdown
- ISO 100 viscosity grade matches R-Series pump specs
- High 249 °C flash point improves operating safety
- Viscosity index 97 keeps film strength across temperatures
- One-quart bottle sized for convenient top-ups
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How long will the ISO 100 viscosity hold up before the oil thins out under continuous compressor duty?
The ISO 100 grade with a viscosity index of 97 and synthetic base resists thinning, staying at 96.4 cSt at 40 °C and 9.3 cSt at 100 °C for consistent film strength.
Does the oil produce noticeable fumes or heat when the pump runs all day?
A flash point of 249 °C means very low vapour pressure, so fumes and additional heat from the lubricant stay minimal during extended operation.
Which compressor pumps is this SPEEDAIRE 1WG49 quart approved for?
It is formulated for use in R-Series compressor pumps, ensuring the correct additive package and viscosity match for that series.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
