Spartan Power
Spartan Power SP-1FT2AWG56 1ft 2 AWG welding battery cable set 5/16" ring
One-foot 2 AWG welding battery cable set with 5/16" ring terminals, UL-listed and moisture-resistant for up to 1000 V
- 1 ft ready-to-use cable saves installation time
- 2 AWG pure copper handles high current loads
- UL 1232/1284/1338/1346/10269 approved for safety compliance
- 5/16" ring terminals fit common battery posts
- Lifetime crimp warranty covers repair for life
Product identity
The Spartan Power SP-1FT2AWG56 is a one-foot, 2 AWG welding battery cable set terminated with 5/16-inch ring terminals. It is built for installers who need a short, heavy-gauge link between a battery and an inverter, starter or distribution block in automotive, marine, RV or off-grid systems.
Sustained-load behaviour
The cable carries UL 1232, 1284, 1338, 1346 and 10269 approvals and is rated for up to 1000 V, VW-1 flame resistance and moisture resistance. Adhesive-lined irradiated polyolefin heat shrink seals each crimp, so the connection stays intact under continuous current, vibration and thermal cycling.
Deciding specification
The conductor is 2 AWG copper cut to a one-foot length with 5/16-inch rings, which fixes the maximum current path and terminal fit for a given installation. Buyers who need a longer reach, a different gauge or a 3/8-inch terminal must choose another part.
Highlights
- 1 ft ready-to-use cable saves installation time
- 2 AWG pure copper handles high current loads
- UL 1232/1284/1338/1346/10269 approved for safety compliance
- 5/16" ring terminals fit common battery posts
- Lifetime crimp warranty covers repair for life
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
Does the 1000 V rated cable generate noticeable heat when powering an inverter all day?
The cable uses UL 1232/1284/1338/1346/10269 approved, VW-1 and moisture-resistant pure copper conductors rated for 1000 V, so heat rise stays minimal during continuous high-current use.
What terminal size does the 5/16" ring lug fit on my existing battery posts?
Each cable end is terminated with a 5/16" ring terminal, matching standard 5/16" battery studs found on many RV, marine and fleet-truck batteries.
Will the adhesive-lined heat-shrink seal hold up on older corroded battery posts?
The adhesive-lined irradiated polyolefin heat-shrink creates a moisture-resistant seal over the crimp, protecting the connection even on aged or slightly corroded terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
