Spartan Power
Spartan Power SP-10FT4CBL38 10 foot 4 AWG Battery Cable Set 3/8" Ring
Ten-foot 4 AWG battery cable set with 3/8-inch ring terminals, UL-listed and RoHS compliant for up to 1000 V
- 10 ft 4 AWG cables reach distant battery terminals
- 3/8" ring terminals fit common battery posts securely
- UL 1232/1284/1338/1346/10269 rated for up to 1000V
- ROHS compliant with VW-1 and moisture resistance
- Lifetime crimp warranty covers repairs for life
Cable Set Overview
The Spartan Power SP-10FT4CBL38 is a 10 foot 4 AWG battery cable set terminated with 3/8" ring terminals. It is built for automotive, RV, marine, solar and off-grid wiring where pure copper conductors are required. The cables are cut to length and ready for immediate installation. UL 1232, 1284, 1338, 1346 and 10269 approvals plus RoHS compliance confirm the specification.
Installation Notes
The set arrives pre-assembled with adhesive-lined irradiated polyolefin heat shrink already applied, so no crimping or heat-gun work is needed on site. Simply route the cables and bolt the ring terminals to the battery posts or bus bars. The heavy 4 AWG gauge is stiff; allow extra slack for bends and secure the run to avoid stress on the terminals. California Proposition 65 warnings apply to the materials used.
Suitability Guide
This kit suits installers who need a single 10 foot, 4 AWG pair with 3/8" rings for inverters, golf carts, fleet trucks or grounding duties. Buyers who need a different length, a larger gauge such as 2 AWG or 1/0 AWG, or 5/16" ring terminals should select another configuration. The lifetime crimp warranty covers the factory terminations for the life of the cable.
Highlights
- 10 ft 4 AWG cables reach distant battery terminals
- 3/8" ring terminals fit common battery posts securely
- UL 1232/1284/1338/1346/10269 rated for up to 1000V
- ROHS compliant with VW-1 and moisture resistance
- Lifetime crimp warranty covers repairs for life
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
How can I confirm the cable set is working correctly after installation?
Verify that the 3/8" ring terminals are securely crimped and the adhesive-lined heat shrink has sealed fully, then check for continuity across the 10-foot 4 AWG conductors.
What comes in the box and what must I purchase separately?
The set includes the 10-foot 4 AWG cables with 3/8" ring terminals and adhesive-lined irradiated polyolefin heat shrink already applied; no additional connectors or shrink tubing are required.
Which cable gauge and terminal size should I choose for my inverter connection?
This model provides 4 AWG conductors with 3/8" ring terminals, rated for up to 1000 V and built to UL 1232, 1284, 1338, 1346 and 10269 standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
