Spartan Power
Spartan Power Single Red 4 ft 2 AWG Battery Cable 5/16
A 4 ft 2 AWG battery cable with a 5/16" ring terminal, UL rated to 1000V for inverter and vehicle wiring
- Heavy-duty 2 AWG cable rated for 1000 V applications
- UL 1232, 1284, 1338, 1346 and 10269 approved for safety
- ROHS compliant, VW-1 and moisture resistant construction
- Assembled in Reno, Nevada with pure copper conductors
- Lifetime crimp warranty covers repairs free of charge
Product identity
The Spartan Power Single Red cable is a 4 ft, 2 AWG battery lead terminated with a 5/16 in ring terminal. It is built for installers who need a ready-made heavy-duty link for inverters, RV house batteries, marine house banks or solar arrays.
Sustained-load behaviour
UL 1232, 1284, 1338, 1346 and 10269 approvals confirm the conductor and insulation are rated for continuous operation at up to 1000 V. The VW-1 flame rating and moisture-resistant jacket maintain integrity under prolonged current flow in engine compartments or bilge areas.
Installation reality
Each end arrives with adhesive-lined irradiated polyolefin heat-shrink already applied over the crimp, so the joint is sealed against corrosion before you route the cable. The lifetime crimp warranty covers repair if a terminal ever loosens, but the fixed 4 ft length means you cannot shorten or extend the run without adding a separate splice.
Highlights
- Heavy-duty 2 AWG cable rated for 1000 V applications
- UL 1232, 1284, 1338, 1346 and 10269 approved for safety
- ROHS compliant, VW-1 and moisture resistant construction
- Assembled in Reno, Nevada with pure copper conductors
- Lifetime crimp warranty covers repairs free of charge
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
Does the 2 AWG cable generate noticeable heat when running continuously at high current?
The cable uses UL 1232, 1284, 1338, 1346 and 10269 approved conductors rated for up to 1000 V and is moisture resistant, so it handles sustained loads without excessive heat buildup.
What terminal size does the 5/16" ring terminal require on the battery post or bus bar?
The cable comes with a 5/16" ring terminal crimped on each end, so the mating stud or bolt must be 5/16" diameter to fit correctly.
Will the adhesive-lined polyolefin heat shrink seal reliably against older corroded battery posts?
The adhesive-lined irradiated polyolefin heat shrink forms a moisture-resistant seal when heated, helping protect the connection even on aged or slightly corroded terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
