Spartan Power
Spartan Power Single Red 2 ft 1/0 AWG Battery Cable
A 2 ft 1/0 AWG battery cable with UL-listed, RoHS-compliant construction and adhesive-lined heat-shrink terminals for secure power connections
- Ready for immediate installation with pre-assembled 2 ft length
- Handles up to 1000 V for demanding power-inverter and vehicle wiring
- UL 1232, 1284, 1338, 1346, 10269 approved for safety compliance
- ROHS compliant, VW-1 rated and moisture resistant for durable performance
- Lifetime crimp warranty covers free repair if the crimp ever fails
Single Red 1/0 AWG 2 ft Battery Cable
This 2-foot cable uses 1/0 AWG pure copper conductor for high-current DC wiring in automotive, marine, RV, solar and off-grid installations. It arrives cut to length with adhesive-lined heat-shrink terminals already crimped, so it is ready to install without additional tools. The heavy-duty construction suits inverter connections, grounding runs and battery bank links where reliable power transfer matters.
Verify Terminal Size And Voltage Rating
Confirm that the 5/16-inch or 3/8-inch ring terminals match the studs on your batteries, inverters or distribution blocks before ordering. The cable is rated for up to 1000 V and carries UL 1232, 1284, 1338, 1346 and 10269 approvals, so check that your system voltage and inspection requirements align with these listings. Ensure the 2-foot length reaches between your components without strain or excessive slack.
Sustained Load Behaviour
ROHS-compliant insulation with VW-1 and moisture resistance maintains integrity during continuous high-amperage draw typical of inverter or solar-charging cycles. The adhesive-lined irradiated polyolefin heat shrink seals each crimp against corrosion and vibration, preventing resistance rise over long runs. A lifetime crimp warranty covers repair if a termination ever fails under normal operating conditions.
Highlights
- Ready for immediate installation with pre-assembled 2 ft length
- Handles up to 1000 V for demanding power-inverter and vehicle wiring
- UL 1232, 1284, 1338, 1346, 10269 approved for safety compliance
- ROHS compliant, VW-1 rated and moisture resistant for durable performance
- Lifetime crimp warranty covers free repair if the crimp ever fails
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
Does the 2 ft 1/0 AWG battery cable arrive with ring terminals already crimped, or must I supply and crimp my own?
The cable is cut to length and ready to use, and every Spartan Power battery cable includes either 5/16? or 3/8? ring terminals depending on the cable size, so terminals are pre-installed.
Which cable gauge should I pick — 4 AWG, 2 AWG, 1/0 AWG or 4/0 AWG — for a typical inverter installation?
The 1/0 AWG gauge supplied here is the size Spartan Power assembles for use with their DC to AC power inverters, while 4 AWG, 2 AWG and 4/0 AWG are offered for other current requirements.
What does the 1000 V rating mean when the cable is connected to a 12 V battery bank?
The 1000 V rating is the maximum voltage the insulation is approved to withstand; on a 12 V system the cable operates far below that limit, so the rating simply confirms the insulation meets UL 1232, 1284, 1338, 1346 and 10269 standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
