Spartan Power
Spartan Power Single Red 1 ft 1/0 AWG Battery Cable
One-foot 1/0 AWG battery cable with UL-listed insulation rated to 1000 V, assembled with adhesive-lined heat-shrink terminals and a lifetime crimp warranty
- Heavy-duty power delivery for inverters and vehicles using 1/0 AWG pure copper conductor
- UL 1232, 1284, 1338, 1346, 10269 approved cables meet rigorous safety standards
- ROHS compliant, VW-1 rated and moisture resistant for reliable off-grid performance
- Assembled in Reno, Nevada with adhesive-lined heat shrink for durable crimp connections
- Lifetime crimp warranty ensures free repair if the termination ever fails
Battery cable 1 ft 1/0 AWG
This 1 ft 1/0 AWG battery cable is a heavy-duty power lead assembled in Reno, Nevada. It uses UL 1232/1284/1338/1346/10269 approved, ROHS compliant, VW-1 and moisture resistant wire rated for up to 1000V. The cable is cut to length and ready to use for DC to AC power inverters and other wiring tasks.
Suits inverter and vehicle wiring
Buyers needing a short, high-current link for inverters, RV, marine, fleet or solar installations will find it suitable. Those who require longer runs, different gauge sizes or alternative terminal styles should look at other options.
Simple ring-terminal connection
The cable arrives with crimped ring terminals so installation only requires bolting to the battery post or bus bar. The lifetime crimp warranty covers any crimp failure, removing the common risk of a loose or corroded joint.
Highlights
- Heavy-duty power delivery for inverters and vehicles using 1/0 AWG pure copper conductor
- UL 1232, 1284, 1338, 1346, 10269 approved cables meet rigorous safety standards
- ROHS compliant, VW-1 rated and moisture resistant for reliable off-grid performance
- Assembled in Reno, Nevada with adhesive-lined heat shrink for durable crimp connections
- Lifetime crimp warranty ensures free repair if the termination ever fails
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
What terminal size does the 1/0 AWG cable use for the battery connection?
The 1/0 AWG battery cable is supplied with either 5/16 inch or 3/8 inch ring terminals depending on the specific cable size configuration.
Will this cable's insulation hold up in the same engine bay as my existing 4 AWG wiring?
The cable uses adhesive-lined irradiated polyolefin heat shrink and carries UL 1232, 1284, 1338, 1346 and 10269 approvals with VW-1 flame and moisture resistance.
How can I confirm the crimp is sound after I install the cable?
A sound crimp shows no visible wire strands, the terminal sits flush against the heat shrink, and the connection passes a firm tug test without movement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
