Spartan Power
Spartan Power 1ft 4 AWG Battery Cable Set 3/8" Ring
One-foot 4 AWG battery cable set with 3/8-inch ring terminals, UL-listed and RoHS-compliant for up to 1000 V
- Ready-to-use 1 ft length speeds installation
- 4 AWG pure copper handles high-current loads
- UL 1232, 1284, 1338, 1346, 10269 approved for safety
- ROHS compliant and VW-1 rated for durability
- Lifetime crimp warranty protects the connection
1 ft 4 AWG battery cable set
This 1 ft 4 AWG battery cable set arrives cut to length with 3/8" ring terminals fitted. It is built from UL 1232/1284/1338/1346/10269 approved cable that is ROHS compliant, VW-1 rated and moisture resistant. Pure copper conductors handle up to 1000 V for inverter, RV, marine, solar and fleet wiring. A lifetime crimp warranty covers the assembled terminations.
Before ordering
Verify that 3/8" ring terminals match the stud size on your battery posts or bus bars. Confirm that 4 AWG cross-section suits the current draw and run length of your specific circuit. Check that the 1 ft overall length reaches between your connection points without tension. Ensure the operating environment stays within the cable's voltage and temperature ratings.
Replaces worn or undersized leads
Swap out corroded, cracked or gauge-mismatched cables that cause voltage drop and heat buildup. The step is worth it when existing wiring shows insulation damage, loose crimps or cannot carry the inverter or charging current cleanly. Not for installations needing longer runs, different terminal sizes or a higher ampacity gauge than 4 AWG.
Highlights
- Ready-to-use 1 ft length speeds installation
- 4 AWG pure copper handles high-current loads
- UL 1232, 1284, 1338, 1346, 10269 approved for safety
- ROHS compliant and VW-1 rated for durability
- Lifetime crimp warranty protects the connection
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
What terminals and heat-shrink are included with the 1 ft 4 AWG set?
The set ships with 3/8" ring terminals already crimped and adhesive-lined irradiated polyolefin heat-shrink installed on both ends.
Which gauge and length suit a 1000 V inverter hook-up?
The 4 AWG, 1 ft cables are rated for up to 1000 V and meet UL 1232, 1284, 1338, 1346 and 10269 approvals.
How much current can this 4 AWG pair actually carry in a vehicle install?
At 4 AWG the cables are built for heavy-duty battery and inverter feeds, with VW-1 and moisture-resistant insulation for automotive environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
