Spartan Power
Spartan Power 1/0 AWG 20 ft Battery Cable
Single black 1/0 AWG battery cable, 20 ft long, UL-listed to 1000 V with adhesive-lined heat-shrink terminals
- Heavy-duty power delivery for inverters and vehicles with 1/0 AWG pure copper conductor
- Ready-to-use 20 ft length cut and terminated for immediate installation
- UL 1232/1284/1338/1346/10269 approved cables rated up to 1000 V for safety
- Moisture-resistant VW-1 jacket with adhesive-lined heat shrink protects connections in harsh environments
- Lifetime crimp warranty covers free repair if the terminal ever fails
Battery Cable 1/0 AWG 20 ft
The Spartan Power battery cable uses 1/0 AWG pure copper conductor cut to a 20 ft length and terminated with 3/8 in ring terminals. It is rated for up to 1000 V and carries UL 1232, 1284, 1338, 1346 and 10269 approvals. The jacket is VW-1 and moisture resistant.
Upgrade From Thinner Gauge
Replacing 4 AWG or 2 AWG cable with this 1/0 AWG size reduces voltage drop on long runs between batteries and inverters. The jump is worth it when the circuit carries high current over distance and the installer needs the crimp security of a lifetime warranty.
Suits High-Current DC Wiring
This cable suits RV, marine, solar, fleet and off-grid DC systems that require a single 20 ft lead with factory crimped ends. Buyers who need multiple conductors, a different terminal size, or a shorter pre-made length should look at other options.
Highlights
- Heavy-duty power delivery for inverters and vehicles with 1/0 AWG pure copper conductor
- Ready-to-use 20 ft length cut and terminated for immediate installation
- UL 1232/1284/1338/1346/10269 approved cables rated up to 1000 V for safety
- Moisture-resistant VW-1 jacket with adhesive-lined heat shrink protects connections in harsh environments
- Lifetime crimp warranty covers free repair if the terminal ever fails
Specifications
| Brand | SPARTAN POWER |
|---|
Questions about this item
What ring terminal hole size fits the 3/8 inch lugs on this 1/0 AWG cable?
The cable ends are terminated with 3/8 inch ring terminals, so a 3/8 inch stud or bolt is required for a secure connection.
How do I install the adhesive-lined heat shrink correctly on the crimped terminals?
Slide the supplied adhesive-lined irradiated polyolefin tubing over each crimp, then apply heat evenly until the adhesive flows and the tubing shrinks tight for a moisture-resistant seal.
When should I inspect or replace the cable under the lifetime crimp warranty?
If a crimp ever loosens, corrodes or shows physical damage, you can return the cable for a free repair under the lifetime crimp warranty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
