We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green solid THHN wire on spool, 10 AWG, 100 ft

SOUTHWIRE COMPANY

SOUTHWIRE COMPANY 11599808 THHN 10 AWG Green 100 ft

SKU CH-ZC97-9YR8R

Green 10 AWG THHN building wire on a 100 ft spool, solid PVC-insulated conductor with a nylon jacket rated for 600 V AC

  • TypeSolid
  • Solid 10 AWG conductor handles 600 V circuits reliably
  • THHN nylon jacket resists oil and abrasion in conduit
  • Green insulation identifies grounding runs at a glance
  • 100 ft spool supplies enough length for typical branch wiring
  • 15 in outside diameter pulls easily through tight conduit

10 AWG THHN Building Wire

This 10 AWG THHN building wire uses a solid copper conductor with PVC insulation and a nylon jacket. It is rated for 600V AC and supplied in a 100 ft spool. The green jacket identifies it as an equipment grounding conductor. It suits residential and commercial branch-circuit wiring.

Replaces damaged or undersized solid conductors

The solid 10 AWG construction fits standard terminal screws and push-in connectors without strand fraying. Upgrading from a smaller gauge reduces voltage drop on longer runs. The nylon jacket eases pulling through conduit compared with older insulation types. The change is worth it when a circuit requires a dedicated ground or a larger ampacity.

Handles 600V AC branch circuits and grounding duties

The 0.15 in nominal outside diameter fits common 1/2 in and 3/4 in conduit sizes. The single solid conductor carries grounding current reliably in dry or damp locations. It runs out when a flexible stranded conductor is needed for vibration or frequent movement. It also runs out where a larger gauge is required by load calculations.

Highlights

  • Solid 10 AWG conductor handles 600 V circuits reliably
  • THHN nylon jacket resists oil and abrasion in conduit
  • Green insulation identifies grounding runs at a glance
  • 100 ft spool supplies enough length for typical branch wiring
  • 15 in outside diameter pulls easily through tight conduit

Specifications

BrandSouthwire Company
TypeSolid

Questions about this item

What conduit size fits the 0.15 in outside diameter of this 10 AWG THHN wire?

The nominal outside diameter is 0.15 in, so select conduit fill tables for THHN at that size; a 1/2 in EMT or PVC conduit typically accommodates several such conductors with proper derating.

How do you strip the nylon jacket and PVC insulation without nicking the solid copper conductor?

Use a calibrated stripper set for 10 AWG solid wire; score the nylon jacket first, then the PVC insulation, and pull straight off — twisting the stripper on solid conductor often causes nicks.

When should the green THHN insulation be replaced in a 600 V AC circuit?

Replace the wire if the green nylon jacket shows cracks, abrasion, or discoloration from heat or chemicals; solid 10 AWG THHN has no moving parts, so insulation integrity is the only wear indicator.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.