Sony
Sony MDR-ZX110 ZX Series Wired On-Ear Headphones White
Lightweight on-ear headphones with 30 mm drivers, 12 Hz to 22 kHz response, swivel-fold earcups and a 1.2 m tangle-resistant cable
- TypeHeadphone
- ColorWhite
- Driver Unit30mm
- Frequency Response12Hz - 22kHz
- Input Impedance24 ohms
- Sensitivity98dB/mW
- 30 mm drivers reproduce 12 Hz to 22 kHz for balanced sound
- Swivel folding earcups pack flat for easy travel
- 2 m Y-type cable resists tangles during daily use
- Cushioned on-ear pads with closed-back design seal in audio
- L-shaped 3.5 mm plug fits securely in portable devices
Lightweight On-Ear Headphones for Daily Listening
The Sony MDR-ZX110 uses 30mm neodymium dynamic drivers to produce sound across a 12Hz to 22kHz range. An impedance of 24 ohms and 98dB/mW sensitivity suit portable devices directly. The on-ear design with cushioned pads and a closed-back build keeps audio contained during commutes or desk sessions. A right-angled 3.5mm plug connects without protruding sharply from the jack.
Consistent Output During Long Sessions
The 30mm dome-type drivers maintain a balanced response across bass, midrange and treble without the compression that can appear in smaller buds after extended play. A 1.2 metre Y-type cable resists tangles so the signal path stays stable when you move. The closed earcups seal consistently, preventing the bass roll-off that open designs exhibit at higher volumes. No battery or active circuitry means performance does not degrade over time.
Wired 3.5mm Connection Limits
The analogue TRS connector restricts use to devices retaining a headphone socket or to an external DAC. The 1.18 metre cable length suits pocket-to-ear routing but cannot reach a desktop tower on the floor without an extension. No inline remote or microphone is included, so call control and voice chat require the host device. The 90-day limited warranty covers manufacturing defects only.
Highlights
- 30 mm drivers reproduce 12 Hz to 22 kHz for balanced sound
- Swivel folding earcups pack flat for easy travel
- 2 m Y-type cable resists tangles during daily use
- Cushioned on-ear pads with closed-back design seal in audio
- L-shaped 3.5 mm plug fits securely in portable devices
Specifications
| Brand | SONY |
|---|---|
| Series | Sony ZX Series Wired On-Ear Headphones |
| Model | Sony ZX Series White |
| Type | Headphone |
| Color | White |
| Driver Unit | 30mm |
| Frequency Response | 12Hz - 22kHz |
| Input Impedance | 24 ohms |
| Sensitivity | 98dB/mW |
| Connector | 1/8" / 3.5 mm TRS Male Right-Angled |
| Ear Coupling | On-ear design |
| Cord Length | 3.9' (1.18m) Cable |
| Features | 30mm Dynamic Drivers, 12 Hz to 22 kHz Frequency Response, Earcups Swivel and Fold For Portability, 3.9' (1.18m) Cable, Headphones, MDR-ZX110 |
| Package Contents | Sony MDR-ZX110 On-Ear Headphones (White), Limited 90-Day Warranty |
Questions about this item
How much power does the 24 ohm, 98 dB/mW driver draw from a phone or laptop during all-day use?
The 24 ohm impedance and 98 dB/mW sensitivity mean the headphones reach loud volume with very little power, so a phone or laptop headphone output can drive them all day without noticeable battery drain.
What source connector must the buyer already have to plug in the 3.5 mm right-angled plug?
A standard 3.5 mm stereo headphone jack is required; the cable ends in a 3.5 mm L-shaped TRS male plug with no adapter included.
Will the 12 Hz – 22 kHz frequency response work properly through an older 3.5 mm jack on legacy audio gear?
Yes, the 3.5 mm TRS connector is the same analogue standard used for decades, so the full 12 Hz to 22 kHz range passes through any compatible jack without loss.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



