Sola/Hevi-Duty
Sola/Hevi-Duty SDP55100T 85-264V AC 5-6V DC 100W 5A DIN Rail Line Protection
DIN-rail switching supply converts 85–264 V AC to 5–6 V DC at 5 A with 100 W output and green LED status
- Wide 85-264V AC input suits global mains
- 5-6V DC output at 5A delivers 100W power
- DIN rail mounting fits standard control panels
- Green LED indicator shows operational status at a glance
- IP20 rated plastic case protects internal components
Sola/Hevi-Duty 5-6V DC 100W DIN Rail Supply
The Sola/Hevi-Duty SDP55100T is a switching DC power supply designed for industrial control panels. It accepts a wide 85 to 264V AC input at 47 to 63 Hz and delivers a regulated 5 to 6V DC output rated at 100W and 5A. The unit mounts on a standard DIN rail inside a plastic case rated IP20 and NEMA 1.
Installers needing a compact single-phase 5V DC
This supply suits panels where a low-voltage DC bus feeds sensors, relays or PLC input modules and space is limited to the 2.95 in height, 1.77 in width and 3.58 in depth footprint. It is not suitable for systems that require a higher DC output voltage, a different mounting method, or an ingress protection rating above IP20.
5 to 6V DC output voltage range
The adjustable 5 to 6V DC output is the critical specification; connected equipment must operate within this narrow window. A green LED indicates the output is present, and the unit provides a hold-up time greater than 25 msec with output noise below 50mV.
Highlights
- Wide 85-264V AC input suits global mains
- 5-6V DC output at 5A delivers 100W power
- DIN rail mounting fits standard control panels
- Green LED indicator shows operational status at a glance
- IP20 rated plastic case protects internal components
Specifications
| Brand | SOLAHD |
|---|
Questions about this item
How can I confirm the SDP55100T is operating correctly after mounting it on the DIN rail?
The green LED status indicator will illuminate when the unit is powered and delivering 5 to 6V DC output within the specified 50mV noise limit.
What accessories are included with the SDP55100T and what must I source separately?
The power supply ships as a standalone DIN-rail unit; AC input wiring, DC output cables, and any required ferrules or terminal blocks are not included.
Which SDP series model should I select for a 25 W load requiring 5 V DC at 5 A?
The SDP55100T provides 100 W capacity with a 5 to 6 V DC adjustable output and 5 A rating, covering your 25 W requirement with headroom.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
