Sola/Hevi-Duty
Sola/Hevi-Duty SDP 148100T DC Power Supply 85-264V AC 48-56V DC 100W 1A DIN Rail
DIN-rail switching supply converts 85–264 V AC to 48–56 V DC at 100 W with green LED status indicator
- Wide 85-264V AC input suits global mains
- 48-56V DC adjustable output fits varied loads
- 100W switching design keeps heat low
- DIN rail mount saves cabinet space
- Green LED gives instant status check
Sola/Hevi-Duty SDP 148100T DC Power Supply
The Sola/Hevi-Duty SDP 148100T is a DIN rail mounted DC power supply designed for industrial control panels and automation systems. It accepts a wide input range of 85 to 264V AC at 47 to 63 Hz and delivers a regulated 48 to 56V DC output rated at 100W and 1A. A green LED provides immediate visual status indication while the plastic case carries an IP20 and NEMA 1 rating.
Suited for single-phase DIN rail installations
This unit suits integrators building machinery, process control or building automation cabinets where a compact 100W supply fits the available rail space. The 2.95 in height, 1.77 in width and 3.58 in depth allow dense side-by-side mounting. Buyers who need higher output current, a different output voltage range or redundant power architecture should look at alternative models.
Steady 100W output with 25 msec hold-up time
Under continuous load the switching topology maintains output noise below 50mV across the full temperature range. Hold-up time exceeds 25 msec at full load, giving downstream PLCs and sensors a brief ride-through during momentary mains dips. The single-phase design delivers consistent 1A current without derating when mounted with proper ventilation spacing.
Highlights
- Wide 85-264V AC input suits global mains
- 48-56V DC adjustable output fits varied loads
- 100W switching design keeps heat low
- DIN rail mount saves cabinet space
- Green LED gives instant status check
Specifications
| Brand | SOLAHD |
|---|
Questions about this item
What input voltage range must my installation provide for this SDP 148100T unit?
The supply accepts 85 to 264 V AC at 47 to 63 Hz single phase, so any standard mains source in that window will power it.
Will the 48 to 56 V DC output from this supply work with legacy 48 V DC loads I already have?
Yes, the adjustable 48 to 56 V DC rail stays within the classic 48 V nominal band, and the 50 mV maximum noise keeps it clean for older equipment.
How do I confirm the SDP 148100T is operating correctly once wired?
The green LED status indicator lights when the output is present; measure 48 to 56 V DC at the terminals and verify ripple stays below 50 mV.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
