Sola/Hevi-Duty
Sola/Hevi-Duty SDN5-48-100P DC Power Supply 48V 5A 240W
DIN-rail switching supply converts 115 to 230 V AC to 48 V DC at 5 A with 240 W output and green LED status
- TypeIndustrial UPS Systems
- Delivers stable 48 V DC at 5 A for reliable equipment operation
- Wide 115–230 V AC input handles global mains without extra transformers
- Compact DIN-rail metal enclosure measuring 4.88 × 3.23 × 4.55 in saves cabinet space
- Low output noise under 50 mV protects sensitive electronics from ripple
- Green LED status indicator gives instant visual confirmation of power health
Industrial DC Power Supply
The Sola/Hevi-Duty SDN5-48-100P delivers 48V DC at 5 amps with a 240W power rating. It accepts a universal 115 to 230V AC input at 60 Hz single phase. The unit mounts on a DIN rail inside a metal case measuring 4.88 in high, 3.23 in wide and 4.55 in deep.
Control Panel Installations
This supply suits automation cabinets and process equipment that require a regulated 48V DC source with output noise below 50mV. It is not for systems needing battery backup, redundant modules or an output voltage other than 48V.
DIN Rail Mounting
The metal enclosure carries an IP20 rating and NEMA 1 rating for indoor enclosure use. A green LED provides a local status indication while the switching topology achieves a hold-up time greater than 20 msec.
Highlights
- Delivers stable 48 V DC at 5 A for reliable equipment operation
- Wide 115–230 V AC input handles global mains without extra transformers
- Compact DIN-rail metal enclosure measuring 4.88 × 3.23 × 4.55 in saves cabinet space
- Low output noise under 50 mV protects sensitive electronics from ripple
- Green LED status indicator gives instant visual confirmation of power health
Specifications
| Brand | SOLA/HEVI-DUTY |
|---|---|
| Type | Industrial UPS Systems |
Questions about this item
Will the DIN-rail clips or internal fan need periodic replacement on the SDN5-48-100P?
The unit mounts on a DIN rail and has a metal case with no fan mentioned, so no moving parts require scheduled replacement.
Which limit appears first when the supply runs continuously at full load — the 5 A output rating or thermal protection?
Continuous output is rated at 5 A with a 5.5 A peak allowance; sustained loads above 5 A will hit the current limit before thermal shutdown.
How much heat and noise does the SDN5-48-100P produce when powering a 240 W load all day?
The metal case dissipates heat passively with no fan, so noise is minimal; output ripple stays below 50 mV under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
