SOBMOTO DIN/Hella USB Charger 36W PD3.0 18W QC3.0 Switch Voltmeter
A motorcycle DIN/Hella USB charger with 36W PD3.0 and 18W QC3.0 fast charging, a built-in switch, and an 8V–30V voltmeter
- Fast charging up to 50% in 30 minutes with 36W PD3.0 and 18W QC3.0
- Waterproof rubber cap and DIN socket withstand rain and dust on adventure rides
- Blue LED voltmeter shows real-time battery status from 8V to 30V
- Built-in switch cuts power to prevent parasitic battery drain when parked
- Precision-fit aluminium alloy body designed for 12mm Hella/DIN sockets on BMW, Ducati, Triumph
Motorcycle DIN/Hella USB Charger
The SOBMOTO charger plugs directly into 12 mm Hella or DIN sockets found on BMW, Triumph and Ducati motorcycles. It supplies both USB-C and USB-A ports with 36 W PD3.0 and 18 W QC3.0 output. A built-in switch cuts power completely to prevent parasitic drain when the bike is parked.
Upgrade from basic DIN adapters
Unlike simple pass-through units this model adds an on-off switch and a blue LED voltmeter that reads 8 V to 30 V. The jump is worth it when you want to monitor battery health at a glance and avoid unplugging the charger after every ride.
Sustained load behaviour
The aluminium alloy body and full rubber cap seal the internals against rain and dust during long trips. The voltmeter continues displaying real-time voltage while both ports deliver power, so you can watch for voltage drop under continuous charging.
Highlights
- Fast charging up to 50% in 30 minutes with 36W PD3.0 and 18W QC3.0
- Waterproof rubber cap and DIN socket withstand rain and dust on adventure rides
- Blue LED voltmeter shows real-time battery status from 8V to 30V
- Built-in switch cuts power to prevent parasitic battery drain when parked
- Precision-fit aluminium alloy body designed for 12mm Hella/DIN sockets on BMW, Ducati, Triumph
Specifications
| Brand | SOBMOTO |
|---|
Questions about this item
What size DIN/Hella socket does the 12 mm aluminium body fit?
It fits a 12 mm Hella/DIN socket only; it will not work in a standard car cigarette-lighter socket.
How do I install it and which step is often missed?
Push the DIN plug fully into the socket until it clicks, then press the built-in on/off switch to activate power; many riders forget to toggle the switch after insertion.
When should I replace the rubber cap that seals the USB-A and USB-C ports?
Replace the cap once it shows cracks, hardening or no longer snaps shut, otherwise water and dust can reach the contacts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



