SMUGDESK
SMUGDESK DualPort 10Gb Ethernet Daughter Card 647581B21 649869001 647579001 HP Gen8 530FLR 530FLRSFP+
Dual-port 10Gb Ethernet daughter card replaces OEM parts 647581B21, 649869001 and 647579001 for HP Gen8 530FLR and 530FLRSFP+ servers
- Exact OEM match for part numbers 647581B21, 649869001, 647579001
- Dual-port 10 Gbps SFP+ interface for high-speed data transmission
- Designed for HP Gen8 530FLR and 530FLRSFP+ slots
- Enterprise-grade stability for virtualization and data centre workloads
- Plug-and-play replacement with no extra configuration needed
Dual-Port 10Gb Ethernet Daughter Card
This SMUGDESK daughter card provides dual-port 10Gbps SFP+ connectivity for HP Gen8 servers. It matches OEM part numbers 647581B21, 649869001 and 647579001 for direct compatibility with 530FLR and 530FLRSFP+ network modules. The card targets enterprise environments requiring high-speed network expansion.
OEM Part-Number Match and Plug-and-Play Design
The board replicates the exact specifications of the three listed HP part numbers, ensuring mechanical and electrical fit in Gen8 server slots. No additional configuration is needed; the card installs as a direct replacement for immediate deployment. This reduces downtime during maintenance or upgrade cycles.
Suited for Gen8 Server Upgrades.
The card serves administrators upgrading or repairing HP Gen8 systems equipped with 530FLR or 530FLRSFP+ modules. It does not support servers outside the Gen8 platform or slots requiring different form factors or port counts. Buyers needing compatibility with newer or older HP generations should look elsewhere.
Highlights
- Exact OEM match for part numbers 647581B21, 649869001, 647579001
- Dual-port 10 Gbps SFP+ interface for high-speed data transmission
- Designed for HP Gen8 530FLR and 530FLRSFP+ slots
- Enterprise-grade stability for virtualization and data centre workloads
- Plug-and-play replacement with no extra configuration needed
Specifications
No published specifications for this item yet.
Questions about this item
Will the SFP+ transceivers or the daughter card itself need periodic replacement?
The daughter card is a passive board with no moving parts; only the SFP+ modules inserted into its two ports may require replacement if a link fails or speeds change.
What throughput ceiling appears first when the card runs at full 10Gbps on both ports continuously?
Each port is limited to 10Gbps by the SFP+ interface, so sustained traffic saturates the per-port line rate before any other bottleneck.
How much heat and power does the card add when it stays active all day in a Gen8 server?
The card draws modest power through the 530FLR slot and relies on the server’s existing airflow; no extra fan or heatsink is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



