We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat white ribbon cable with 90 degree down angled USB A plugs at both ends 2.0 meters long

SMUGDESK

SMUGDESK 90° Down Angled USB 2.0 Male to Male Flat Ribbon Flex Cable 2.0M 480Mbps

SKU CH-DJ7Z-7Y5Y4

A 90° down-angled flat ribbon USB 2.0 cable with male-to-male connectors for 480 Mbps data and charging in tight spaces over 2.0 m

  • 90° down-angled connector fits tight gaps and embedded installs
  • Flat ribbon flex cable routes cleanly in confined spaces
  • USB 2.0 delivers 480 Mbps data and steady charging
  • Male-to-male link connects two Type-A devices directly
  • 0 m length suits long fixed wiring and multi-device setups

2.0 m 90° Down-Angled USB 2.0 Cable

This 2.0 metre flat ribbon cable connects two USB Type-A ports using a low-profile 90° down-angled connector on one end. The ultra-thin flexible construction allows tidy routing in confined spaces such as embedded enclosures or behind office equipment. It carries both data and power over a single run.

Installers needing a space-saving link between

The male-to-male layout suits point-to-point connections where both ends present a standard Type-A socket, such as printer-to-PC or hub-to-embedded-board setups. Builders who require a Type-C or Micro-B endpoint, or who need USB 3.x throughput, should select a different cable.

Push both Type-A plugs firmly until they click

The flat ribbon bends easily but should not be folded sharply at the connector junction; excessive creasing can fracture the internal conductors. Allow a gentle radius at the 90° exit and secure the cable with ties if vibration is present.

Highlights

  • 90° down-angled connector fits tight gaps and embedded installs
  • Flat ribbon flex cable routes cleanly in confined spaces
  • USB 2.0 delivers 480 Mbps data and steady charging
  • Male-to-male link connects two Type-A devices directly
  • 0 m length suits long fixed wiring and multi-device setups

Specifications

No published specifications for this item yet.

Questions about this item

Do both devices need a USB Type-A port for this male-to-male cable to connect them?

Yes, each end has a standard USB 2.0 Type-A male plug so both devices must provide a matching Type-A socket.

Will the 90° down-angled plug still seat properly next to a legacy USB 1.1 port on older equipment?

The connector follows the standard Type-A form factor, so it fits legacy USB 1.1 receptacles while the cable negotiates the highest mutually supported speed.

How can I confirm the link is running at the rated 480 Mbps after installation?

Check the host controller properties or device manager on either connected computer; it should list the connection speed as 480 Mbps when the link is active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.