We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight detachable terminal blocks and a PCIe connector

SMUGDESK

SMUGDESK 8-Port PCIe RS485/RS422 Serial Card TVS Protection Detachable Terminal Blocks

SKU CH-PG1X-TV2F6

Adds eight isolated RS485/RS422 COM ports via PCIe with TVS surge and ±15KV ESD protection plus opto-isolation, detachable terminal blocks.

  • 8 independent RS485/RS422 channels for multi-device industrial control
  • TVS surge lightning and ±15KV ESD protection guards equipment from voltage spikes
  • Opto-isolation cuts ground-loop interference for stable factory-floor communication
  • Auto RS485 direction control plus selectable 120Ω termination simplifies installation
  • Standard PCIe x1/x4/x8/x16 fit with dual brackets suits standard and 2U chassis

Industrial 8-Port Serial Expansion

This SMUGDESK PCIe card adds eight independent RS485/RS422 COM ports to an industrial PC or server. It supports half-duplex 2-wire and full-duplex 4-wire modes with a maximum baud rate of 921.6kbps and transmission distances up to 1200m. Each channel connects up to 31 slave devices on a single bus.

Detachable Terminal Blocks & Multi-Layer Protection

Removable terminal blocks allow rapid on-site wiring and maintenance without soldering. Every port features independent opto-isolation plus TVS diode, lightning surge and ±15KV ESD protection, plus a selectable 120 ohm termination resistor to suppress ground loops and industrial voltage spikes.

Standard PCIe Installation with Flexible Brackets

The card fits any standard PCIe x1, x4, x8 or x16 slot and includes both full-height and low-profile brackets for 2U chassis. Auto hardware direction control removes the need for jumper configuration on RS485 lines. Drivers cover Windows 10, 11, Server, Linux and FreeBSD for PLC, inverter and sensor connectivity.

Highlights

  • 8 independent RS485/RS422 channels for multi-device industrial control
  • TVS surge lightning and ±15KV ESD protection guards equipment from voltage spikes
  • Opto-isolation cuts ground-loop interference for stable factory-floor communication
  • Auto RS485 direction control plus selectable 120Ω termination simplifies installation
  • Standard PCIe x1/x4/x8/x16 fit with dual brackets suits standard and 2U chassis

Specifications

No published specifications for this item yet.

Questions about this item

Will the terminal blocks need replacing after repeated wiring changes?

The card uses detachable terminal blocks for each of the 8 channels, allowing on-site wiring and maintenance without soldering; the blocks themselves are standard pluggable connectors rated for repeated insertion cycles.

What limits the number of devices on each RS485 bus?

Each RS485 bus supports up to 31 slave devices per channel, and the onboard selectable 120 Ω terminal matching resistor helps maintain signal integrity at the maximum 1200 m cable length.

How much heat does the card generate inside a 2U chassis running continuously?

The low-profile bracket option fits 2U compact industrial chassis, and the opto-isolation plus TVS protection circuitry is designed for stable operation in harsh factory environments without active cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.