We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 2.5 inch SAS SATA hot swap caddy with metal rails and LED latch

SMUGDESK

SMUGDESK 2.5 Inch SAS SATA Hot Swap Caddy for HP Gen8 651687 651699

SKU CH-T8JH-STZP8

2.5-inch hot-swap drive caddy fits HP ProLiant Gen8 servers, accepts SAS or SATA drives, matches OEM parts 651687-001 and 651699-001

  • Exact OEM match for HP part 651687-001 and 651699-001 ensures seamless Gen8 server integration
  • Hot-swap design enables drive changes without server shutdown for continuous operation
  • Supports 2.5-inch SAS hard drives and SATA SSDs for flexible storage configuration
  • Built-in fault indicator LED provides instant drive status monitoring and failure alerts
  • Compatible with HP ProLiant DL160, DL320e and DL360e Gen8 rack servers

HP Gen8 2.5-inch SAS SATA hot-swap caddy

This 2.5-inch SFF carrier replaces HP OEM part numbers 651687-001 and 651699-001 for Gen8 rack servers. It accepts both SAS mechanical hard drives and SATA solid-state drives in a hot-pluggable tray. The built-in LED lock latch shows drive status and secures the disk against vibration. Designed for administrators who need non-stop drive replacement in dense server environments.

Verify Gen8 bay and backplane compatibility

Confirm your server is an HP ProLiant DL160 Gen8, DL320e Gen8 or DL360e Gen8 with standard 2.5-inch hot-swap bays. The backplane must support SAS and SATA signalling for the drive type you plan to install. Ensure the release handle and locking buckle align with the chassis ejection mechanism before ordering. This caddy does not fit Gen9 or later models or 3.5-inch large form factor slots.

Passive cooling with metal guide rails

The reinforced plastic casing uses metal guide rails to conduct heat into the server airflow path without a fan. No active cooling components add noise or power draw. The tray draws negligible power beyond the drive itself and relies on the chassis fans for thermal management. The status LED operates from the backplane supply during normal operation.

Highlights

  • Exact OEM match for HP part 651687-001 and 651699-001 ensures seamless Gen8 server integration
  • Hot-swap design enables drive changes without server shutdown for continuous operation
  • Supports 2.5-inch SAS hard drives and SATA SSDs for flexible storage configuration
  • Built-in fault indicator LED provides instant drive status monitoring and failure alerts
  • Compatible with HP ProLiant DL160, DL320e and DL360e Gen8 rack servers

Specifications

No published specifications for this item yet.

Questions about this item

Does the tray include the 2.5-inch SAS or SATA drive, or must I supply my own?

The caddy is a carrier only; you must provide a compatible 2.5-inch SAS mechanical drive or SATA SSD separately.

Which HP OEM part numbers does this carrier replace?

It is an exact replacement for HP part numbers 651687-001 and 651699-001, matching Gen8 server specifications.

Will the front-panel LED show drive activity and faults while the server is running?

Yes, the built-in status LED indicates drive activity, abnormal alarms and running status for real-time monitoring during hot-swap operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.