Slip Plate
Slip Plate SLIP4-4X1G dry lubricant 1 gal can water base
Water-based dry lubricant with graphite additive operates from -75 °F to 450 °F and is non-flammable
- Water-based formula reduces VOC exposure
- Graphite additive provides dry-film lubrication
- Operates from -75 °F to 450 °F
- Non-flammable with flash point above 200 °F
- USDA Certified Biobased Product
General-purpose dry lubricant
Slip Plate SLIP4-4X1G is a water-based dry lubricant supplied in a one-gallon can. It uses graphite as its primary additive to create a dry film that reduces friction on moving parts. The product is suited for maintenance teams and machine shops needing a general-purpose coating. It arrives new and ready for immediate application.
Temperature and compliance limits
The lubricant operates between minus 75 degrees F and 450 degrees F, giving a wide range for cold starts and high-heat equipment. Its flash point exceeds 200 degrees F and the formulation is non-flammable. VOC content is 3.9 percent, so the product is not compliant in all fifty states. California Proposition 65 warns that it contains a chemical known to cause reproductive harm.
Capacity and headroom
The one-gallon container provides enough volume for repeated coating of slides, conveyors and guide rails in a typical workshop. The dry film handles sustained loads within the stated temperature band without breaking down. It is not rated by NSF, so it should not be used where food-grade certification is required. Buyers needing a certified food-safe lubricant or a lower-VOC formula for restricted regions must choose a different product.
Highlights
- Water-based formula reduces VOC exposure
- Graphite additive provides dry-film lubrication
- Operates from -75 °F to 450 °F
- Non-flammable with flash point above 200 °F
- USDA Certified Biobased Product
Specifications
| Brand | SLIP PLATE |
|---|
Questions about this item
Is the 1 gal can the only size available for this dry lubricant?
The product is supplied as a 1 gal can. No other container sizes are mentioned for this item.
How does the -75 °F to 450 °F range hold up on a machine slide in daily use?
The lubricant stays effective from -75 °F up to 450 °F, so it will not freeze in cold shops or burn off on hot surfaces.
What does the 3.9 % VOC content mean for shop compliance?
At 3.9 % VOC the product is not 50-state VOC compliant, so check local air-quality rules before using it in regulated areas.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
