Slip Plate
Slip Plate SLIP1-5GB Dry Lubricant 5 gal Pail Mineral
General-purpose dry lubricant with graphite in mineral spirits, operating from -75 to 450 °F and containing 49 % VOC
- Dry film reduces friction without attracting dust using graphite primary additive
- Withstands extreme cold down to -75 °F for reliable cold-start performance
- Remains stable up to 450 °F under continuous high-heat operation
- 49 % VOC content meets flammable-liquid Category 3 classification
- Flash point above 105 °F supports safer handling in shop environments
General-purpose dry lubricant
Slip Plate SLIP1-5GB is a mineral-spirits-based dry film lubricant supplied in a five-gallon pail. It uses graphite as the primary additive to create a low-friction coating on metal surfaces. The product is intended for general-purpose machinery and machine-shop applications where a dry film is preferred over wet oils or greases.
Capacity and operating envelope
The pail provides a net fill of five gallons for high-volume or recurring use. The lubricant remains functional from minus seventy-five degrees Fahrenheit up to four hundred fifty degrees Fahrenheit, covering extreme cold and high-heat environments. It is not compliant with fifty-state VOC regulations due to a forty-nine percent VOC content.
Thermals and safety in use
The flash point is greater than one hundred five degrees Fahrenheit and the material is classified as a Category 3 flammable liquid. The coating is black in colour and is not odourless. California Proposition 65 applies because the formulation contains a chemical known to the state to cause birth defects or other reproductive harm.
Highlights
- Dry film reduces friction without attracting dust using graphite primary additive
- Withstands extreme cold down to -75 °F for reliable cold-start performance
- Remains stable up to 450 °F under continuous high-heat operation
- 49 % VOC content meets flammable-liquid Category 3 classification
- Flash point above 105 °F supports safer handling in shop environments
Specifications
| Brand | SLIP PLATE |
|---|
Questions about this item
Will the mineral spirits carrier in this dry lubricant attack the seals or paint on my older equipment?
The product uses mineral spirits as its carrier with graphite as the primary additive. It is flammable with a flash point greater than 105 degrees F and has a VOC content of 49 percent.
How can I verify the Slip Plate coating is curing correctly after I apply it?
The lubricant is black in colour and odorless is listed as no. Once the mineral spirits carrier flashes off, a dry graphite film remains that operates from -75 degrees F up to 450 degrees F.
Does the 5-gallon pail include a spray wand or dip stick, or must I buy application tools separately?
The container is a 5-gallon pail with a net fill of 5 gallons. The specifications list only the lubricant itself; no spray wand, dip stick or other application accessories are mentioned as included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
