Slide Sledge
Slide Sledge 25052 30 in hand hammer 9 lb 6 tips
Nine-pound, 30-inch multi-head hammer set includes six interchangeable pin drivers and a nylon carrying bag
- Versatile impact work with six interchangeable pin drivers
- Controlled striking force from nine-pound drive bar weight
- Extended reach for confined spaces with thirty-inch overall length
- Organised transport and storage in included nylon carrying bag
- Precision fit for multiple pin sizes using dedicated driver tips
9 lb slide hammer set for heavy pulling
The Slide Sledge 25052 delivers a 9 lb drive bar weight on a 30 in shaft for high-impact pulling jobs. Six interchangeable pin drivers from 1/2 in to 3 in cover a wide range of fastener and bushing sizes. A nylon carrying bag keeps every component organised on the job site. This kit suits technicians who need one tool for multiple heavy-duty extraction tasks.
Manual operation eliminates motor heat and noise
Because the tool is struck by hand, there is no motor, fan or electrical draw to manage. The operator controls every blow, so noise stops the moment work pauses. No battery or compressor is required, making the set practical in remote or confined locations. Thermal limits and power ratings simply do not apply to this manual design.
Six pin drivers and a bag expand the pulling range
The 1/2 in, 7/8 in, 1-1/4 in, 2 in, 2-1/2 in and 3 in drivers let you match the tip to the workpiece without hunting for adapters. Swapping tips takes seconds, reducing downtime between pulls. The included nylon bag protects the drivers from loss and damage during transport. Buyers who need powered pulling or hydraulic force will not find that capability here.
Highlights
- Versatile impact work with six interchangeable pin drivers
- Controlled striking force from nine-pound drive bar weight
- Extended reach for confined spaces with thirty-inch overall length
- Organised transport and storage in included nylon carrying bag
- Precision fit for multiple pin sizes using dedicated driver tips
Specifications
| Brand | Slide Sledge |
|---|---|
| Model | 25052 |
Questions about this item
How do I attach the 213103 pin driver to the 30 in drive bar, and what is the step people skip?
Thread the 213103 pin driver onto the drive bar until it seats fully against the shoulder; the step often missed is verifying the driver is flush before striking.
Which components will need replacement after repeated use on this 25052 set?
The 213101, 213102, 213103, 213104, 213105 and 213106 pin drivers wear at the tip and should be replaced when the striking face mushrooms or cracks.
What limit appears first during sustained heavy blows with the 9 lb drive bar?
Operator fatigue from the 9 lb mass typically limits continuous use before any component failure occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
