SitePro
SitePro 20-755 Hi-Magnetic Masonry Nail 2" (50.8mm) hardware
Hi-magnetic masonry nail measuring 50.8 mm for secure fastening in concrete or brick
- TypeNails
- 2-inch length drives securely into masonry substrates
- Hi-magnetic coating resists corrosion for lasting hold
- 8 mm specification matches standard anchor requirements
- SITEPRO brand trusted by trade professionals
- 20-755 model identifies the correct fastener for reordering
SitePro 20-755 Hi-Magnetic Masonry Nail
The SitePro 20-755 is a 2-inch (50.8 mm) masonry nail designed for fastening into hard substrates such as concrete, brick or block. Its hi-magnetic property helps hold the nail in place during positioning and driving. It suits tradespeople and DIY users who need reliable mechanical anchoring in masonry applications.
Capacity and headroom
The 50.8 mm length provides sufficient embedment for light to medium fixtures, including timber battens, brackets and strapping. In very dense concrete or when securing heavier loads, the nail may not achieve full penetration or required holding strength, and a mechanical anchor or screw anchor becomes necessary.
Practical limits of the interface
The nail relies on friction and displacement in a pre-drilled hole, so performance depends on hole diameter, substrate hardness and installation technique. Over-driving can damage the nail head or crush the surrounding masonry, reducing grip. It is not intended for structural connections, overhead loads or applications requiring certified pull-out values.
Highlights
- 2-inch length drives securely into masonry substrates
- Hi-magnetic coating resists corrosion for lasting hold
- 8 mm specification matches standard anchor requirements
- SITEPRO brand trusted by trade professionals
- 20-755 model identifies the correct fastener for reordering
Specifications
| Brand | SITEPRO |
|---|---|
| Type | Nails |
Questions about this item
Will the 2" Hi-Magnetic Masonry Nail hold securely when driven into older brickwork alongside standard fasteners?
The 2" (50.8mm) length and hi-magnetic design are intended for masonry applications, providing a firm hold in brick and concrete where standard nails may bend or slip.
How can I verify the nails are the correct 20-755 model after opening the package?
Check the packaging for the SitePro brand and the 20-755 part number; the nails themselves measure 2 inches (50.8mm) in length.
Does the box include a driver or magnetic holder, or must I buy those separately?
The package contains the 20-755 Hi-Magnetic Masonry Nails only; any driving tools or magnetic holders are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
