SitePro
SitePro 20-754 Hi-Magnetic Masonry Nail 1-1/2 in 38.1 mm
Hi-magnetic masonry nail sized at 1-1/2 inch (38.1 mm) for secure fastening into concrete or brick
- TypeNails
- Hi-Magnetic hold speeds masonry fastening
- 1-1/2 inch length suits common anchor tasks
- 1 mm metric size fits standard drill bits
- SITEPRO brand trusted by trade professionals
- New condition ensures full factory performance
SitePro 20-754 Masonry Nail
The SitePro 20-754 is a 1-1/2 inch (38.1 mm) Hi-Magnetic masonry nail designed for fastening into hard substrates. It is supplied new for professional tradespeople and DIY users requiring reliable penetration into concrete or brick. The magnetic property assists with placement during installation. This hardware item suits general construction and repair tasks.
Suitable for concrete and brick fixing
This nail suits builders fixing timber battens, brackets or furring strips into masonry walls. The Hi-Magnetic feature helps solo workers hold the fastener steady before striking. It is not for buyers who need a corrosion-resistant coating for exterior or damp environments. It is not for applications requiring a larger head diameter or a different shank profile than the standard masonry design.
38.1 mm length decides fit
The single specification that decides suitability is the 38.1 mm length. This dimension determines the maximum embedment depth achievable in the base material. Verify that this length provides sufficient holding power for your specific substrate thickness and load requirement before purchase.
Highlights
- Hi-Magnetic hold speeds masonry fastening
- 1-1/2 inch length suits common anchor tasks
- 1 mm metric size fits standard drill bits
- SITEPRO brand trusted by trade professionals
- New condition ensures full factory performance
Specifications
| Brand | SITEPRO |
|---|---|
| Type | Nails |
Questions about this item
What type of nail is the SitePro 20-754 classified as?
The SitePro 20-754 is classified as a masonry nail designed for use in concrete, brick, or block materials.
What physical dimensions does the 1-1/2 inch (38.1 mm) nail require for proper fit?
The nail measures 1-1/2 inches (38.1 mm) in length and requires a hammer or driver capable of striking the head without bending the shank.
How is the Hi-Magnetic feature used during installation, and what common error occurs?
The Hi-Magnetic head holds the nail to a magnetic driver for one-handed placement; the common error is striking the nail at an angle, which reduces holding power in masonry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
