We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal desk stand with three adjustable arms on a round base, cable clips along arms

SIIG, Inc

SIIG, Inc CE-MT1812-S2 Triple Monitor Desk Stand 13"-27" monitor accessory

SKU CH-CYEZ-0N7P1 MPN CE-MT1812-S2

Holds three 13" to 27" monitors up to 22 lbs each on a single base with tilt, swivel, 360° rotation and height adjustment from 9" to 18.5"

  • TypeTools and Hardware
  • Holds three 13″–27″ screens up to 22 lbs each on one base
  • Adjustable 9″–18.5″ height with ±0.15″ fine-tune for perfect alignment
  • Tilt ±15°, swivel ±15° and 360° rotation for any viewing angle
  • VESA 50×50, 75×75 and 100×100 mm compatibility covers most monitors
  • Grommet mount fits 3/8″–2½″ holes up to 2½″ thick plus cable management

Triple monitor desk stand

The CE-MT1812-S2 holds three screens sized 13" to 27" on a single base, freeing desk space. Each monitor can weigh up to 22 lbs (10 kgs) and mount to VESA 50x50mm, 75x75mm or 100x100mm patterns. It suits users who need a multi-display array without drilling permanent holes. Builders needing support for larger panels or heavier loads should look elsewhere.

Capacity and headroom

Height adjusts from 9" to 18.5" (228mm to 470mm) with fine-tuning of +/- 0.15" (+/- 4mm) per screen. Tilt range is +/-15°, swivel is +/-15° and full 360° rotation allows portrait or landscape orientation. The solid tabletop base sits on any flat surface; through-hole mounting fits holes 3/8" to 2 1/2" wide in surfaces up to 2 1/2" thick. Screens beyond 27" or exceeding the weight limit are not supported.

Bundled accessories and software

An installation guide and complete mounting hardware kit are included for both base styles. Integrated cable management channels route wires neatly along the arms and column. No software, drivers or power adapters are supplied or required. The hardware kit covers VESA screws and grommet fittings so assembly can start immediately.

Highlights

  • Holds three 13″–27″ screens up to 22 lbs each on one base
  • Adjustable 9″–18.5″ height with ±0.15″ fine-tune for perfect alignment
  • Tilt ±15°, swivel ±15° and 360° rotation for any viewing angle
  • VESA 50×50, 75×75 and 100×100 mm compatibility covers most monitors
  • Grommet mount fits 3/8″–2½″ holes up to 2½″ thick plus cable management

Specifications

BrandSIIG
TypeTools and Hardware
Shipping weight9.98 kg
Package size1372 × 508 × 356 mm

Questions about this item

Will the CE-MT1812-S2 hold three 27" monitors that each weigh 22 lbs?

Yes, the stand supports up to three screens from 13" to 27" with a maximum load of 22 lbs (10 kgs) per monitor.

How do I verify the monitors are level after I mount them on the CE-MT1812-S2?

Each arm offers fine height adjustment of +/- 0.15" (+/- 4 mm) so you can align the tops of all three displays precisely.

Does the CE-MT1812-S2 include the screws for 75x75 mm and 100x100 mm VESA patterns, or must I buy them separately?

The package contains a mounting hardware kit covering VESA 50x50 mm, 75x75 mm and 100x100 mm, plus an installation guide.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.