SIEVERT
SIEVERT Gas Hose 1/4" 30 ft Black 1530IS
Liquid propane hose with 1/4" inner diameter and 30 ft length for brazing, soldering and heating tasks
- 30 ft length reaches distant workstations easily
- 1/4 in inner diameter fits standard fittings
- Inner rubber layer resists liquid propane permeation
- Woven reinforcement handles high-pressure gas flow
- Outer cover shields against sunlight and ozone
Gas hose for liquid propane
This Sievert hose delivers liquid propane to torches and heating tools used in roofing and construction. The 30 ft length gives reach across a work area without moving the supply tank. It is built for brazing, soldering, heating and gas-cutting tasks.
Factory-fitted ends simplify hookup
Each assembly arrives with fittings already installed on both ends so it connects directly to compatible equipment. The reinforcing weave handles high pressure, while the outer cover resists sunlight, ozone and rough handling. Users must still verify that the 1/4" bore matches their regulator and torch inlets before pressurising.
Multi-layer construction holds up on long jobs
The inner rubber layer resists propane permeation during extended burns, and the braided middle layer keeps the hose from ballooning under constant pressure. The black outer jacket protects the reinforcement from UV degradation and abrasion when the line is dragged across roofing materials all day.
Highlights
- 30 ft length reaches distant workstations easily
- 1/4 in inner diameter fits standard fittings
- Inner rubber layer resists liquid propane permeation
- Woven reinforcement handles high-pressure gas flow
- Outer cover shields against sunlight and ozone
Specifications
| Brand | Sievert |
|---|
Questions about this item
How can I verify the hose is ready for use after connecting it to my propane equipment?
Pressurise the line and brush soapy water over every fitting; bubbles indicate a leak that must be fixed before lighting the torch.
What comes with the 1530IS hose and what must I supply myself?
The 30 ft hose arrives with fittings crimped on both ends; you provide the propane regulator and the torch or appliance.
Which length and bore should I select for a standard roofing torch setup?
Choose the 1/4 in. inside diameter by 30 ft length — it matches the common torch inlet and gives ample reach on the job site.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
