SIEMENS
SIEMENS Safety Switch 30A 600VAC 10HP NEMA 1
A fusible heavy-duty safety switch rated 30 A at 600 V AC with a NEMA 1 steel enclosure
- MaterialHAWA
- Heavy-duty 30 A switching for demanding industrial circuits
- 10 hp motor rating at 600 V AC single phase
- UL Listed safety switch meets recognised safety standards
- NEMA 1 steel enclosure rated IP 20 protects internals
- Compact 15.5 × 9.0 × 8.5 in footprint fits tight panels
Safety Switch for 30 A 600 VAC Service
This Siemens safety switch is a heavy-duty, fusible disconnect rated for 30 amps at 600 volts AC single phase. It accepts Class J or R fuses and carries a 10 horsepower rating at 600 volts AC. The metallic NEMA 1 enclosure is UL Listed for indoor use.
Capacity and Headroom
The two-pole, two-wire design handles motor loads up to 10 hp at the rated voltage. It provides reliable isolation for circuits within its 30-amp continuous current limit. Applications exceeding 30 amps or requiring a higher voltage rating fall outside its capabilities.
NEMA 1 Enclosure and IP20 Rating
The steel enclosure measures 15.5 inches high, 9.0 inches wide and 8.5 inches deep with an IP20 ingress rating. This construction protects internal contacts from finger contact and limited solid debris in dry indoor environments. It does not protect against water jets, dust ingress or outdoor weather exposure.
Highlights
- Heavy-duty 30 A switching for demanding industrial circuits
- 10 hp motor rating at 600 V AC single phase
- UL Listed safety switch meets recognised safety standards
- NEMA 1 steel enclosure rated IP 20 protects internals
- Compact 15.5 × 9.0 × 8.5 in footprint fits tight panels
Specifications
| Material | HAWA |
|---|---|
| Brand | Siemens |
Questions about this item
Will the 30 A 600 V AC fusible safety switch coordinate with existing Class J or R fuses already installed in my panel?
Yes, the switch is designed for use with Class J and R fuses, so your current fuse inventory will fit without modification.
How can I verify the switch is operating correctly once wired?
Confirm the 2PST contacts open and close cleanly, the handle locks in both ON and OFF positions, and the UL-listed enclosure shows no damage after energising at 600 V AC.
Does the NEMA 1 steel enclosure ship with fuses or must I purchase Class J or R fuses separately?
The enclosure, mounting hardware and 2-pole 2-wire switch mechanism are included; Class J or R fuses are not supplied and must be bought separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
