We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey plastic DIN rail power supply, 22 mm wide, green LED status indicator

SIEMENS

SIEMENS 6EP1331-5BA00 DIN rail power supply 24V 14W

SKU CH-15G2-03QBE

DIN-rail switching supply delivers 24 V DC at 0.6 A from 100–230 V AC or 110–300 V DC in a 22 mm wide IP20 housing

  • TypePower Quality & Distribution
  • Wide input range accepts 85 to 264V AC and 110 to 300V DC
  • Compact 22 mm width fits dense DIN rail installations
  • Green LED status indicator confirms output at a glance
  • 14 W switching design delivers 24 V DC at 0.6 A
  • Operates reliably from -20 to 70 °C with IP20 protection

SIEMENS 6EP1331-5BA00 DIN Rail Power Supply

The SIEMENS 6EP1331-5BA00 is a compact DIN rail power supply delivering 24V DC at 14W. It accepts a wide input range of 100 to 230V AC or 110 to 300V DC, making it suitable for industrial control cabinets and automation systems. The plastic case measures 80mm high, 22mm wide and 100mm deep with an IP20 rating. A green LED provides a clear OK status signal for quick visual monitoring.

Suits low-power 24V control circuits.

This unit suits panels needing a slim, single-phase supply for sensors, relays or small PLCs where 0.6A continuous output is sufficient. The 1A peak current handles brief inrush without tripping. Builders needing more than 14W, redundant outputs, or a metal enclosure should look at larger SITOP models or supplies with higher current ratings.

Deciding spec: 14W at 24V DC

The 14W power rating and 0.6A output current define the usable load for your 24V circuit. Verify your total device draw stays below this limit, including start-up peaks covered by the 1A peak rating. If your application exceeds 14W or requires more than 0.6A steady current, this supply will not meet the demand.

Highlights

  • Wide input range accepts 85 to 264V AC and 110 to 300V DC
  • Compact 22 mm width fits dense DIN rail installations
  • Green LED status indicator confirms output at a glance
  • 14 W switching design delivers 24 V DC at 0.6 A
  • Operates reliably from -20 to 70 °C with IP20 protection

Specifications

BrandSIEMENS
TypePower Quality & Distribution

Questions about this item

How much noise does the 24 V output produce during continuous operation?

The unit specifies 200 mV peak-to-peak and 40 mV RMS output noise at full load.

What input wiring must already be in place for this supply to operate?

A single-phase AC circuit rated 100 to 230 V at 50 to 60 Hz, or a DC source between 110 and 300 V, with conductors sized for the load.

Will the green LED status indicator work the same way as on earlier SITOP units I already have?

The green LED lights when the output is within tolerance, matching the behaviour described for the SITOP PSU100C series.

More in Electrical Boxes

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.