SIEMENS
SIEMENS 265-1022 3-Way Solenoid Air Valve 120VAC 0-50 psi
Three-way solenoid air valve operates on 120 VAC at 50/60 Hz with 0.35 cfm air consumption and 0.06 Cv flow coefficient
- Three-way pattern directs airflow in multiple paths
- 120 VAC coil operates on standard line voltage
- 35 cfm air consumption minimises compressed-air use
- Cv 0.06 suits low-flow control circuits
- PBT body resists moisture and common chemicals
SIEMENS 265-1022 Three-Way Solenoid Valve
The SIEMENS 265-1022 is a three-way solenoid air valve designed for HVAC control systems. It operates on 120VAC at 50/60 Hz and handles air pressure from 0 to 50 psi. The valve body is constructed from PBT material with a coefficient of volume (Cv) of .06. It is suitable for automated pneumatic switching in commercial or industrial equipment.
Installation uses barbed hose connections on all
Each port features a 1/4 inch male barbed hose fitting for direct tubing attachment. The enclosure is a junction box type and the valve mounts in any orientation, simplifying placement. A common issue is ensuring the tubing is fully seated on the barbs to prevent air leaks at operating pressure. No electrical leads are included, so wiring must be supplied separately for the 120VAC coil.
Continuous duty rated for sustained airflow control
The valve is built for continuous energisation at 120VAC without overheating during extended cycles. Air consumption is rated at .35 cfm, reflecting steady-state flow through the .06 Cv orifice. The PBT body resists degradation from constant air exposure and temperature cycling. Performance remains stable across the full 0 to 50 psi range during prolonged operation.
Highlights
- Three-way pattern directs airflow in multiple paths
- 120 VAC coil operates on standard line voltage
- 35 cfm air consumption minimises compressed-air use
- Cv 0.06 suits low-flow control circuits
- PBT body resists moisture and common chemicals
Specifications
| Brand | SIEMENS |
|---|
Questions about this item
How do I confirm the SIEMENS 265-1022 valve is actuating correctly after wiring it to 120VAC?
Apply 120VAC at 50 or 60 Hz and listen for the solenoid click; then verify air flows from the common 1/4 in barbed port to the normally open port while the normally closed 1/4 in male port stays sealed up to 50 psi.
What comes in the box with the SIEMENS 265-1022 and what fittings must I supply?
The valve body with integral junction box and 1/4 in barbed common port plus 1/4 in male normally closed port are included; you must provide 1/4 in ID hose, clamps and 1/4 in NPT fittings for the normally open connection.
The specs show a single Cv of .06 — how do I know this capacity suits my circuit?
A Cv of .06 delivers roughly .35 cfm at 50 psi differential; choose this model when your pneumatic pilot or small actuator requires that flow rate at 120VAC 50/60 Hz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
