Sick
Sick WT150-P460 Photoelectric Switch PNP 10-30V DC 100mm 1000Hz M8 4-pin IP67
A photoelectric proximity sensor with background suppression, PNP output, 10-30 V DC supply, 100 mm range, 1,000 Hz switching frequency and IP67 protection
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Background suppression detects objects up to 100 mm
- Visible red LED with 5° dispersion for precise alignment
- PNP output switches at 1,000 Hz with .5 ms response
- IP67 enclosure withstands –25 °C to +55 °C operation
- M8 4-pin connector enables quick installation
Compact photoelectric sensor for 10–30 V DC systems
The Sick WT150-P460 is a rectangular photoelectric proximity switch with background suppression. It operates on 10 V DC to 30 V DC and draws 20 mA. A visible red LED emits a 5° beam for precise detection. The PNP output supports light or dark switching selected via the L/D control cable.
Sensing range 2 mm to 100 mm
The sensor detects objects from 2 mm up to 100 mm. A 5-turn potentiometer sets the exact switching point. Switching frequency reaches 1,000 Hz with a 0.5 ms response time. Output current is limited to 100 mA. Beyond 100 mm the sensor cannot reliably detect targets.
IP67 enclosure weighs 7 g
The ABS housing with PC optics meets IP67 for dust and water protection. Protection class II circuitry includes supply-voltage, short-circuit and reverse-polarity safeguards. Ambient temperature range spans –25 °C to +55 °C in operation and –40 °C to +75 °C in storage. Connection uses a 4-pin M8 male connector.
Highlights
- Background suppression detects objects up to 100 mm
- Visible red LED with 5° dispersion for precise alignment
- PNP output switches at 1,000 Hz with .5 ms response
- IP67 enclosure withstands –25 °C to +55 °C operation
- M8 4-pin connector enables quick installation
Specifications
| Brand | Sick |
|---|---|
| Model | SICK WT150-P460 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the WT150-P460 sensor operate reliably on my 30 V DC supply?
Yes, the supply voltage range is 10 V DC to 30 V DC, so a 30 V DC cabinet supply is within specification.
How can I verify the WT150-P460 is switching correctly after wiring?
The sensor switches at up to 1,000 Hz with a 0.5 ms response time; use an oscilloscope or PLC input monitor to confirm clean transitions at the expected frequency.
Does the WT150-P460 come with a mounting bracket or must I order one separately?
The box includes a BEF-W150-A mounting bracket; the M8 4-pin mating cable is not supplied and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
