Sick
Sick GSE6-P1112 miniature photoelectric sensor PNP 10-30 V DC 15 m range
Miniature through-beam photoelectric sensor with PNP output, 10–30 V DC supply, 15 m maximum range and IP67-rated ABS/PC housing
- Detects objects up to 15 m away with visible red PinPoint LED
- Operates reliably from 10 V to 30 V DC supply voltage
- IP67 enclosure rating protects against dust and water ingress
- Compact 12 mm × 31.5 mm × 21 mm housing fits tight spaces
- PNP output with selectable light/dark switching for flexible control
Miniature Through-Beam Sensor
The Sick GSE6-P1112 is a rectangular through-beam photoelectric sensor with a PinPoint LED emitting visible red light at 650 nm. It offers a maximum sensing range of 15 m and an operating range up to 10 m. The PNP switching output supports selectable light or dark switching via a selector. It operates on a 10 V DC to 30 V DC supply with a 30 mA power consumption.
Suited for Long-Range Presence Detection
This sensor suits automation tasks requiring reliable object detection over distances up to 10 m in a compact 12 mm by 31.5 mm by 21 mm housing. The IP67-rated ABS/PC and PMMA enclosure withstands ambient temperatures from –25 °C to +55 °C. Buyers needing background suppression, diffuse reflection sensing, or a shorter minimum detection distance should consider alternative sensing principles.
Simple Cable Connection with Bracket
Installation uses the supplied stainless steel mounting bracket (1.4301/304) and a fixed 2 m PVC cable with three 0.14 mm² conductors. The protection class III design requires a SELV/PELV power source and the circuit protection covers reverse polarity, short-circuit, and transient overvoltage. Ensure the 100 mA output current limit and < 500 µs response time match the controller input specifications to avoid signal errors.
Highlights
- Detects objects up to 15 m away with visible red PinPoint LED
- Operates reliably from 10 V to 30 V DC supply voltage
- IP67 enclosure rating protects against dust and water ingress
- Compact 12 mm × 31.5 mm × 21 mm housing fits tight spaces
- PNP output with selectable light/dark switching for flexible control
Specifications
| Brand | sick |
|---|---|
| Model | GSE6-P1112 |
Questions about this item
What supply voltage must my system provide for the GSE6-P1112 to operate?
The sensor requires a 10 V DC to 30 V DC supply with a ripple of ± 10 %.
Will the sensor fit in the same 12 mm wide cut-out used by older rectangular photoelectric units?
Yes, the housing measures 12 mm wide by 31.5 mm high by 21 mm deep, matching that footprint.
How can I verify the output is switching correctly after wiring the PNP cable?
With the light/dark selector set, the PNP output delivers VS minus 3 V when high and approximately 0 V when low, at up to 100 mA.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
