We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini-SAS SFF-8087 to four SFF-8482 cables with power, 3.28 ft

Shenzhen Shenzhong TECH. CO. LTD.

Shenzhen Shenzhong TECH. CO. LTD. SAS cable SFF-8087 to SFF-8482 3.28 ft 36P 10 Gbps

SKU CH-YNJD-993BK

Connects a mini-SAS SFF-8087 port to four SFF-8482 drives at 10 Gbps over 3.28 ft

  • Connector TypeUSB A to USB B
  • Connects SFF-8087 controller to four SFF-8482 drives via SAS
  • 36-pin mini-SAS interface supports 10 Gbps bandwidth per lane
  • 28 ft length suits standard server chassis layouts
  • New cable ready for immediate SAS storage deployment

Cable for SAS backplane expansion

This cable connects a Mini-SAS SFF-8087 port to four individual SFF-8482 connectors with integrated power leads. It targets builders adding direct-attached SAS drives to a RAID controller or HBA inside a server or workstation chassis. The 36-pin plug carries four lanes at 10 Gbps each, matching the bandwidth of a single 6 Gbps SAS link per drive. The 3.28 ft length suits typical internal routing from a rear-mounted controller to front drive bays.

Sustained throughput on four lanes

Each of the four SFF-8482 branches maintains the full 10 Gbps signalling rate during continuous read and write workloads, so aggregate controller bandwidth scales with the number of active drives. The moulded mini-SAS plug and latch-equipped SAS connectors resist unseating under vibration or thermal cycling in densely populated enclosures. Power pins on every branch supply the drive directly from the backplane or PSU, eliminating separate power cables. Systems limited to a single SFF-8087 port cannot address more than four drives with this assembly.

Highlights

  • Connects SFF-8087 controller to four SFF-8482 drives via SAS
  • 36-pin mini-SAS interface supports 10 Gbps bandwidth per lane
  • 28 ft length suits standard server chassis layouts
  • New cable ready for immediate SAS storage deployment

Specifications

Connector TypeUSB A to USB B

Questions about this item

Does the 10 Gbps SAS cable generate noticeable heat or draw extra power when running continuously?

The cable is passive and carries only signal and low-voltage power lines, so it adds no measurable heat or power draw during all-day operation.

What host connector must my controller or backplane provide for the SFF-8087 end to plug in?

Your controller or backplane needs a mini-SAS SFF-8087 36-pin port to accept the 36P connector on this 3.28 ft cable.

More in USB Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.