Senco
Senco 21-Gauge 2 in. Electro-Galvanized Medium Head Pins (5,000-Pack) pneumatic accessory
21-gauge, 2-inch electro-galvanized medium-head pins in a 5,000-count strip pack for finish nailers
- TypeOther
- MaterialHAWA
- 21-gauge precision for fine finish work with minimal surface marking
- 2-inch length suits trim and moulding applications in a single fastener
- Electro-galvanized steel resists corrosion on interior and protected exterior projects
- Glue-collated strips feed smoothly through FinishPro 21LXP without jamming
- 5,000-pack quantity reduces reload frequency on extended jobs
21-Gauge 2 in. Medium Head Pins
These 21-gauge electro-galvanized steel pins measure 2 inches long with a 0.029 inch shank diameter. They feature a chisel point and smooth shank for clean penetration in finish work. The medium head style provides secure holding power for trim and moulding applications. Supplied in a 5000-count strip collation pack for continuous fastening.
Glue strip collation loads quickly into compatible
The pins are assembled in strip form using glue collation that feeds smoothly through the magazine. Simply insert the full strip into the tool's loading channel and advance to the first fastener. Misfeeds can occur if the strip is bent or if debris blocks the feed path. Always keep the collation dry and straight for reliable operation.
Verify your nailer accepts 21-gauge 2 inch strip
Check that your pneumatic finish nailer is rated for 21-gauge wire and a 2 inch maximum fastener length. The tool must also support glue-collated strip magazines, not coil or plastic strip types. Using incorrect gauge or length pins will cause jams and may damage the driver mechanism.
Highlights
- 21-gauge precision for fine finish work with minimal surface marking
- 2-inch length suits trim and moulding applications in a single fastener
- Electro-galvanized steel resists corrosion on interior and protected exterior projects
- Glue-collated strips feed smoothly through FinishPro 21LXP without jamming
- 5,000-pack quantity reduces reload frequency on extended jobs
Specifications
| Brand | Senco |
|---|---|
| Type | Other |
| Material | HAWA |
Questions about this item
How do I verify the 21-gauge pins are feeding correctly after loading them into the FinishPro 21LXP?
Fire a few test pins into scrap material; they should drive flush with the medium head seated cleanly and the chisel point penetrating without bending or jamming.
What comes in the 5,000-pack and what else is needed to use them?
The pack contains 5,000 electro-galvanized steel pins, 21 gauge, 2 in. long with a smooth shank and chisel point, glue-collated in strips; you only need a compatible FinishPro 21LXP nailer to drive them.
Which pin length and gauge should I select for trim work with the FinishPro 21LXP?
Choose the 2 in., 21-gauge pins listed here; they match the tool's specification and provide the holding power needed for medium-head finish applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
