Senco
Senco 10M100CKMFDS #10 x 1 in zinc-plated steel screws 1000-pack
Zinc-plated steel #10 screws, 1 inch long, supplied in a 1000-piece pack for general-purpose fastening
- TypeScrewdrivers
- Pan head resists pull-through with .348 in width
- Zinc-plated steel resists corrosion in damp conditions
- #10 x 1 in size fits metal up to 3/32 in thick
- Square drive size 2 reduces cam-out during driving
- 1000-piece collated pack speeds repetitive fastening tasks
Senco #10 x 1 in zinc-plated steel screws
The Senco 10M100CKMFDS pack supplies 1000 collated pan-head screws made from zinc-plated steel. Each fastener measures #10 by 1 in and meets ASTM C1513 dimensional standards. The square drive accepts a size-2 bit for reliable engagement. They are intended for general-purpose threaded fastening into pre-tapped holes.
Replaces loose or bulk fasteners for high-volume
Switching to this collated format eliminates the need to handle individual screws during repetitive assembly. The 1000-piece count reduces reload frequency on production lines or large residential projects. The upgrade is worthwhile when driving speed and consistent depth control outweigh the cost of collated strips.
Suits contractors and assemblers driving #10
Builders who need a zinc-plated pan head with a 0.348 in head width and a maximum material thickness of 3/32 in will find the dimensions match the spec. Users requiring a different head style, longer lengths, or a nut-included package should select an alternative fastener.
Highlights
- Pan head resists pull-through with .348 in width
- Zinc-plated steel resists corrosion in damp conditions
- #10 x 1 in size fits metal up to 3/32 in thick
- Square drive size 2 reduces cam-out during driving
- 1000-piece collated pack speeds repetitive fastening tasks
Specifications
| Brand | Senco |
|---|---|
| Model | 10M100CKMFDS |
| Type | Screwdrivers |
Questions about this item
What drive bit fits the #10 pan-head screws in this 1,000-pack?
Each screw uses a #2 square-drive recess, so a #2 square bit seats fully and reduces cam-out during installation.
How do I avoid stripping the heads when driving these screws into pre-tapped holes?
Keep the driver perpendicular, apply steady pressure, and stop as soon as the pan head seats flush; over-driving deforms the 7/64 in maximum head height.
Will the zinc plating hold up if the screws are used in a damp environment?
The zinc-plated steel finish resists surface corrosion in normal indoor and sheltered outdoor conditions, but prolonged immersion or salt exposure will eventually degrade the coating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
