We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch low-profile hard drive 1.0 inch thick

Seagate

Seagate ST320423A 20.4 Gb 5400 rpm 512 Kb 8.9 ms EIDE 3.5" 1.0" laptop hard drive

SKU CH-D7ZB-56YD7

20.4 Gb laptop hard drive with 5400 rpm speed, 512 Kb buffer and 8.9 ms seek time via EIDE DMA/ATA 66

  • NAND Flash Memory TypeHard Drive
  • 4 Gb capacity stores legacy OS and data
  • 5400 rpm spindle with 8.9 ms seek reads files quickly
  • 512 Kb buffer plus Ultra DMA 66 sustains transfer rates
  • 0 inch low-profile 3.5 inch form factor fits tight bays

20.4 Gb low-profile EIDE drive

This 20.4 Gb Seagate hard drive uses a 3.5 inch form factor with a 1.0 inch z-height for low-profile laptop bays. It connects through an EIDE interface supporting DMA and Ultra ATA 66 transfer modes. The 512 Kb buffer and 8.9 ms seek time suit basic storage tasks on legacy systems.

Sustained workload behaviour

At 5400 rpm the spindle delivers steady throughput for sequential reads and writes rather than burst speed. The small buffer limits caching during long transfers so sustained rates settle near the media transfer ceiling. Seek latency remains consistent because the actuator does not park aggressively between operations.

Highlights

  • 4 Gb capacity stores legacy OS and data
  • 5400 rpm spindle with 8.9 ms seek reads files quickly
  • 512 Kb buffer plus Ultra DMA 66 sustains transfer rates
  • 0 inch low-profile 3.5 inch form factor fits tight bays

Specifications

BrandSeagate
NAND Flash Memory TypeHard Drive

Questions about this item

How much power and heat does the 5400 rpm 3.5" drive produce when running continuously?

The 5400 rpm spindle speed and 3.5 inch form factor keep power draw and heat output modest during all-day operation, suited to legacy laptop bays.

Which cable and controller does the EIDE DMA/ATA 66 interface require on the host system?

You need a 40-pin EIDE ribbon cable and a host controller that supports DMA/ATA 66 (Ultra) to connect this drive.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.