We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow vinyl insulated male disconnect terminals, pack of 50

Scotch

Scotch MVU10-250DMX Male Disconnect 10-12 AWG Yellow Vinyl PK50

SKU CH-X5HZ-F98AC

Yellow vinyl male disconnects accept 10-12 AWG wire, rated 600 V and 221 °F, with 0.25 in tabs in a 50-piece pack

  • TypeElectrical Connectors
  • Crimp-ready male disconnect fits 10-12 AWG wire
  • Yellow vinyl insulation resists heat up to 221°F
  • 25 in tab width matches standard blade terminals
  • CSA, UL and RoHS certified for code-compliant installs
  • Pack of 50 speeds bulk wiring jobs

10-12 AWG Yellow Male Disconnects

The Scotch MVU10-250DMX pack contains 50 crimp-style male disconnect terminals. They accept 10 to 12 AWG wire and feature copper contacts with yellow vinyl insulation rated to 221 degrees F. Each terminal fits a 0.25 inch by 0.032 inch tab and is UL Listed, CSA Certified and RoHS Compliant.

Installers needing 0.25 inch tab compatibility

These disconnects suit automotive, industrial and general wiring jobs that require a 0.25 inch male tab on 10-12 AWG conductors. They are not for circuits using smaller or larger wire gauges, different tab widths, female or piggyback terminals, or fully insulated barrel designs.

Crimp termination for 10-12 AWG wire

The butted-seam barrel with a 0.15 inch inside diameter is sized for 10 to 12 AWG conductors and terminates with a standard crimp tool. This wire-range fit is the single specification that decides whether the terminal matches the conductor in your application.

Highlights

  • Crimp-ready male disconnect fits 10-12 AWG wire
  • Yellow vinyl insulation resists heat up to 221°F
  • 25 in tab width matches standard blade terminals
  • CSA, UL and RoHS certified for code-compliant installs
  • Pack of 50 speeds bulk wiring jobs

Specifications

TypeElectrical Connectors
Brand3M

Questions about this item

What wire gauges fit the 0.15 in barrel on these 10-12 AWG male disconnects?

The barrel inside diameter of 0.15 in accepts 10 AWG and 12 AWG stranded copper wire.

Which crimp tool setting prevents the butted seam from splitting during termination?

Use a ratchet crimper matched to 10-12 AWG insulated terminals; position the butted seam facing the anvil so compression closes the seam rather than opening it.

When should the yellow vinyl insulation be replaced on a 600 V circuit?

Replace any disconnect showing cracked, melted or brittle vinyl, or if the copper tab turns dark — heat above 221 °F degrades the partial-coverage insulation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.