Scotch
Scotch 3750P Carton Sealing Tape Pad 3.1mil Clear PK40 electrician tool
Heavy-duty clear carton sealing tape in 3.1 mil thickness with 35 lb/in tensile strength, supplied as a 40-pack of 6-inch by 2-inch pads
- Heavy-duty sealing with 35 lb/in tensile strength
- 1 mil thickness resists tears and splits
- Rubber adhesive bonds instantly at 35 °F
- 6 in × 2 in pads in a 40-count case
- Meets ASTM D3652, D3654, D3330, D3759 standards
Heavy-Duty Carton Sealing Tape Pad
The Scotch 3750P pad supplies forty rolls of clear, rubber-adhesive tape rated at 35 lb/in tensile strength for heavy-duty box sealing. Each roll measures 2 inches wide by 6 inches long at a 3.1 mil thickness, meeting ISO 9001 and ASTM D3652, D3654, D3330 and D3759 standards. The 18-month shelf life supports long-term inventory storage.
Upgrade from Light-Duty Film
This pad replaces thinner, general-purpose films that tear under load or lose grip in cool conditions. The jump is worth it when cartons exceed 35 lb/in stress, when ambient temperature drops to 35 °F, or when compliance with the listed ASTM test methods is required. Lighter tapes without the same tensile rating or temperature floor will not meet those demands.
Capacity and Headroom
Forty rolls provide enough length for high-volume packing stations without frequent changeovers. The heavy-duty rating comfortably handles double-wall corrugated boxes and dense contents, while the rubber adhesive maintains bond down to the minimum performance temperature. The pad runs out when a facility needs wider tape, longer continuous rolls, or a printed message on the seal.
Highlights
- Heavy-duty sealing with 35 lb/in tensile strength
- 1 mil thickness resists tears and splits
- Rubber adhesive bonds instantly at 35 °F
- 6 in × 2 in pads in a 40-count case
- Meets ASTM D3652, D3654, D3330, D3759 standards
Specifications
| Brand | SCOTCH |
|---|
Questions about this item
What size dispenser or surface does the 2 in wide, 6 in long pad need?
Each pad is 2 inches wide by 6 inches long (51 mm by 0.15 m), so a dispenser or work surface must accommodate at least that width and length for smooth hand application.
How do you apply the tape by hand without it splitting, and what step is often missed?
Pull the tape evenly across the carton, pressing firmly to engage the rubber adhesive; the step often missed is applying enough pressure along the full 35 lb/in tensile strength to activate the heavy-duty bond.
When should the unused pads be replaced based on shelf life?
The manufacturer rates shelf life at 18 months; replace any pads stored beyond that period to ensure the adhesive still meets ASTM D3652, D3654, D3330 and D3759 performance standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
