Schneider Electric
Schneider Electric ZBE102 Contact Block 1NC 22 mm 10A 600V AC
A 22 mm momentary contact block with one normally-closed circuit rated 10 A at 600 V AC for ZB4 or ZB5 operators
- TypeIndustrial Electrical Controls & Automation
- Size22 mm
- 1NC contact interrupts circuits for safety shutdowns
- 10 A at 600 V AC handles heavy control loads
- 22 mm mount fits ZB4 and ZB5 operators
- Screw-clamp terminals speed up panel wiring
- Meets CSA 22.2 No. 14 and IEC 60947 standards
Schneider Electric ZBE102 Contact Block
The Schneider Electric ZBE102 is a 22 mm momentary contact block designed for industrial control panels. It provides a single normally closed circuit for emergency-stop or safety-interlock functions. Panel builders and maintenance engineers use it with ZB4 or ZB5 operators in machine-control applications.
1NC contact form rated 10A at 600V AC
The block carries a 1NC contact form rated at 10A and 600V AC, meeting NEMA A600/Q600 designation. This rating is the decisive figure for selecting the correct block for a given control-circuit load. It mounts on 22 mm operators and uses screw-clamp terminals for secure wiring.
Screw-clamp terminals and IEC 60947 compliance
Screw-clamp terminals maintain consistent contact pressure under vibration and thermal cycling. The component complies with EN/IEC 60947-1, EN/IEC 60947-5-1, EN/IEC 60947-5-4, JIS C8201-1, JIS C8201-5-1, UL 508 and CSA C22.2 No. 14 for sustained industrial duty.
Highlights
- 1NC contact interrupts circuits for safety shutdowns
- 10 A at 600 V AC handles heavy control loads
- 22 mm mount fits ZB4 and ZB5 operators
- Screw-clamp terminals speed up panel wiring
- Meets CSA 22.2 No. 14 and IEC 60947 standards
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Size | 22 mm |
Questions about this item
What does the 10A at 600V AC rating mean when the block is installed in a control panel?
It means the single normally-closed contact can reliably switch loads up to 10 amps at 600 volts AC in industrial control circuits.
Which operator series does the 22 mm mounting pattern accept?
The block mounts on Schneider Electric ZB4 or ZB5 chrome and plastic operators that share the 22 mm cut-out.
What panel cut-out and terminal style are required for installation?
A 22 mm diameter cut-out is needed and the block uses screw-clamp terminals for wire connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
