Schneider Electric
Schneider Electric XVBL8G6 Spot Light, Blue, Strobe Tube, 120V AC, 75 FPM
Blue warning light delivers 10-joule strobe flashes at 75 per minute with IP65 and NEMA 4X/12 ratings for outdoor use
- TypeLights
- widthdiameter3.200
- Blue strobe delivers 10 J flashes for high visibility
- 75 flashes per minute ensure clear warning signals
- IP65 and NEMA 4X ratings protect against dust and water
- Operates from -13 °F to 131 °F for harsh environments
- Twist-and-lock mounting simplifies installation on 120 V AC power
Blue Strobe Warning Light for Industrial Use
The Schneider Electric XVBL8G6 is a blue strobe warning light built for industrial and outdoor environments. It operates on 120V AC power and delivers a flash rate of 75 flashes per minute with a 10 Joule light output. The IP65 and NEMA 1, 4X, 12 ratings confirm protection against dust and water jets. A twist-and-lock mounting system allows for secure installation on compatible bases.
Suitable for Fixed 120V AC Installations Only
This unit suits facilities needing a durable visual signal for hazards or process status on a 120V AC supply. The polycarbonate lens and glass-reinforced polyamide housing withstand temperatures from -13 to 131 degrees F. Buyers requiring a different voltage, a steady or rotating beacon, or a lower flash rate should look at other models. The fixed 75 FPM rate and strobe tube technology are not adjustable.
120V AC Voltage Determines Compatibility
The single specification that decides fit is the 120V AC power requirement with a 290mA current draw. The device must be wired to a matching 120V AC circuit; it will not operate on DC or other AC voltages. Verify your supply voltage and wiring method before purchase. The twist-and-lock base must also match your existing mounting hardware.
Highlights
- Blue strobe delivers 10 J flashes for high visibility
- 75 flashes per minute ensure clear warning signals
- IP65 and NEMA 4X ratings protect against dust and water
- Operates from -13 °F to 131 °F for harsh environments
- Twist-and-lock mounting simplifies installation on 120 V AC power
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Lights |
| widthdiameter | 3.200 |
Questions about this item
What voltage supply must I already have to run this 120V AC strobe light?
You need a 120V AC power source; the unit draws 290mA AC when operating.
Will the IP65 and NEMA 4X ratings let me keep this light next to older equipment in damp areas?
Yes, the IP65 and NEMA 1, 4X, 12 ratings protect against dust and water jets, so it can sit alongside legacy gear in wet environments.
How do I confirm the 75 flashes-per-minute strobe is working after I wire it up?
Apply 120V AC power and count the blue flashes; you should see 75 flashes each minute from the 10-joule strobe tube.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
