Schneider Electric
Schneider Electric XVBL4B5 Warning Light Orange LED 24-48V DC
Orange LED warning light flashes 60 times per minute, runs on 24 to 48V DC, and meets IP65 and NEMA 4X ratings for harsh environments
- TypeLights
- widthdiameter3.200
- IP65 and NEMA ratings protect against dust and water
- 50,000-hour LED life reduces maintenance intervals
- 60 flashes per minute ensure clear warning visibility
- Operates from -40 °F to 158 °F for harsh environments
- 24–48 V DC input suits industrial power systems
Industrial warning light for 24-48V DC systems
This Schneider Electric XVBL4B5 warning light operates on 24 to 48V DC supplies and uses an orange LED source. It flashes at 60 flashes per minute with a 7W light output. The unit is rated IP65 and meets NEMA 1, 4X and 12 standards for industrial environments.
Sustained operation in extreme temperatures
The housing uses glass-reinforced polyamide and a polycarbonate screw-on dome lens rated for continuous exposure from -40 degrees to 158 degrees F. Lamp life is specified at 50,000 hours under continuous duty. Current draw settles at 850mA DC during extended runs.
Surface-mount enclosure with screw-on lens
The 3.200 width diameter fits standard surface-mount installations without additional brackets. A screw-on dome lens allows tool-free lamp access while maintaining the IP65 seal. Power connects via flying leads for direct wiring into 24V AC or 24 to 48V DC circuits.
Highlights
- IP65 and NEMA ratings protect against dust and water
- 50,000-hour LED life reduces maintenance intervals
- 60 flashes per minute ensure clear warning visibility
- Operates from -40 °F to 158 °F for harsh environments
- 24–48 V DC input suits industrial power systems
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Lights |
| widthdiameter | 3.200 |
Questions about this item
How much heat or noise does the 7W LED warning light produce when running continuously on 48V DC?
The unit draws 850mA DC at 48V for roughly 40W power input. Its IP65 polycarbonate dome and glass-reinforced polyamide housing dissipate heat passively with no moving parts, so it runs silently.
What wiring and power supply must I already have to install this surface-mount beacon?
You need a 24V AC or 24-48V DC source capable of at least 1300mA AC or 850mA DC, plus suitable cable for the wire-lead connection and a flat surface for the four mounting holes.
Can the orange LED dome replace the lens on my older NEMA 4X stack light that uses a screw-on polycarbonate cover?
Yes. The screw-on dome fits the same thread pattern used on Schneider NEMA 1, 4X and 12 housings, so it threads directly onto legacy bases without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
