Schneider Electric
Schneider Electric XAPG39503 22 mm 3-hole metal pushbutton enclosure
A 22 mm die-cast zinc enclosure with three holes and NEMA 13 and 4 ratings
- TypeIndustrial Electrical Controls & Automation
- NEMA 13 and 4 ratings protect against dust and water ingress
- Three 22 mm holes fit standard industrial pushbuttons
- Die-cast zinc construction withstands harsh environments
- 9 in depth accommodates 2.93 in contact blocks
- Compact 3.03 x 3.15 in footprint saves panel space
Industrial control housing
Schneider Electric XAPG39503 is a die-cast zinc pushbutton enclosure built for 22 mm operators in industrial electrical and automation panels. It provides three mounting holes in a single column and carries NEMA 4 and 13 ratings for indoor protection against water and oil ingress. The grey housing measures 3.03 in high, 3.15 in wide and 6.90 in deep.
Conduit and depth limits
A 3/4 in conduit entry is the only wiring route specified, so cable planning must fit that opening. Internal contact blocks cannot exceed 2.93 in depth, which restricts the choice of switches and pilot devices that can be installed. No other conduit sizes or mounting patterns are documented.
Replaces smaller or plastic enclosures
This unit upgrades from single-hole or non-metallic boxes when an application demands three 22 mm operators, metal durability and NEMA 13 oil-tight sealing. It is not suited for installations that require more than three stations, larger conduit entries or deeper contact blocks. RoHS compliance supports regulated markets.
Highlights
- NEMA 13 and 4 ratings protect against dust and water ingress
- Three 22 mm holes fit standard industrial pushbuttons
- Die-cast zinc construction withstands harsh environments
- 9 in depth accommodates 2.93 in contact blocks
- Compact 3.03 x 3.15 in footprint saves panel space
Specifications
| Brand | Schneider Electric |
|---|---|
| Type | Industrial Electrical Controls & Automation |
Questions about this item
Should I choose a 1-hole, 2-hole or 3-hole enclosure for my control panel?
This enclosure has three 22 mm holes in a single column, giving you space for three pushbuttons or selector switches in one compact housing.
What does the 22 mm hole size mean when I mount operators?
The 22 mm cut-outs accept standard industrial pushbuttons, pilot lights and selector switches that are designed for that industry-standard diameter.
How does the NEMA 13 and 4 rating limit where I can install this box?
NEMA 13 and 4 ratings mean the die-cast zinc enclosure resists dust, spraying water, oil and non-corrosive coolants, so it suits indoor and outdoor industrial locations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
