We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Schneider Electric

Schneider Electric VW3A1104R30 Remote LCD Keypad Cable RJ45-RJ45 3m

SKU CH-MZ1C-YBE1Q

Connects Altivar 212, 312, 61 and 71 drives to a remote LCD keypad over three metres

  • TypeMotors
  • Connects Altivar 212 and 312 drives remotely
  • Links Altivar 61 and 71 units at distance
  • Three-metre RJ45 cable reaches panel locations
  • Compatible with Grainger item 13E219 reference
  • Schneider Electric build ensures industrial reliability

Remote Keypad Cable for Altivar Drives

The Schneider Electric VW3A1104R30 connects a remote LCD keypad to Altivar 212, 312, 61 and 71 variable speed drives using standard RJ45 connectors. It suits maintenance engineers and panel builders who need to operate drives from a distance.

Three-Metre Length for Panel Flexibility

The 3 m cable provides enough reach for front-of-panel keypad mounting in typical industrial enclosures. It runs out when the keypad must be positioned further than three metres from the drive or when a different connector type is required.

RJ45-to-RJ45 Compatibility Decides Fit

This cable only works with drives and keypads that both present RJ45 ports. If the drive uses a different interface or the keypad requires a proprietary connector, this part will not connect.

Highlights

  • Connects Altivar 212 and 312 drives remotely
  • Links Altivar 61 and 71 units at distance
  • Three-metre RJ45 cable reaches panel locations
  • Compatible with Grainger item 13E219 reference
  • Schneider Electric build ensures industrial reliability

Specifications

BrandSCHNEIDER ELECTRIC
TypeMotors

Questions about this item

Will this 3 m RJ45 cable connect my existing Altivar 61 drive to the remote keypad?

Yes, the cable is listed for use with Altivar 61 and 71 series drives, so your existing unit will link directly to the remote LCD keypad.

How can I confirm the cable is working once I plug it into the Altivar 312?

The remote LCD keypad should power up and display drive parameters immediately after both RJ45 ends are seated firmly in the drive and keypad ports.

Does the box include the remote LCD keypad or only the RJ45 cable?

Only the 3 m RJ45-to-RJ45 cable is supplied; the remote LCD keypad itself must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.