We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric VW3A1104R10 RJ45 remote keypad cable, 1 metre, new

Schneider Electric

Schneider Electric VW3A1104R10 Remote LCD Keypad Cable RJ45 1m

SKU CH-CK9V-8S55S

Connects Altivar 212, 312, 61, 71 drives to remote LCD keypads with a 1 m RJ45 link

  • TypeMotors
  • Connect Altivar 212 drives with this 1 m RJ45 cable
  • Link Altivar 312 units using the supplied remote keypad cable
  • Integrate Altivar 61 controllers via the Schneider Electric VW3A1104R10 lead
  • Extend Altivar 71 keypad reach with a factory-made 1 m connection
  • Ready for new installation straight from the sealed pack

Schneider Altivar Remote Keypad Cable

This one-metre RJ45 cable connects a remote LCD keypad to Altivar 212, 312, 61 and 71 variable speed drives. It suits technicians commissioning or maintaining Schneider Electric motor control installations where the keypad must be mounted away from the drive unit. The cable carries both power and data for the display interface. Builders who need a longer run or a different connector type cannot use this part.

Practical Limits of the RJ45 Link

The fixed one-metre length restricts how far the keypad can sit from the drive cabinet. RJ45 connectors on both ends mean no adapters are required, but the cable cannot be extended or joined without adding connection points that may affect signal integrity. The cable is not rated for continuous flexing or outdoor exposure, so it must be routed in a protected indoor environment. Installers who need greater reach or a ruggedised jacket must select a different solution.

Deciding Specification — Drive Compatibility

The cable is validated for Altivar series ATV212, ATV312, ATV61 and ATV71 drives only. If the drive model is not one of these four series, the keypad will not communicate correctly. No other drive families are supported by this part number. Buyers must confirm the exact drive series before ordering.

Highlights

  • Connect Altivar 212 drives with this 1 m RJ45 cable
  • Link Altivar 312 units using the supplied remote keypad cable
  • Integrate Altivar 61 controllers via the Schneider Electric VW3A1104R10 lead
  • Extend Altivar 71 keypad reach with a factory-made 1 m connection
  • Ready for new installation straight from the sealed pack

Specifications

BrandSCHNEIDER ELECTRIC
TypeMotors

Questions about this item

Should I choose the 1 m cable or a different length for my Altivar drive?

The VW3A1104R10 is a 1 m RJ45 remote keypad cable; select this length when the keypad will sit close to the Altivar 212, 312, 61 or 71 unit.

What does the 1 m length mean once the cable is connected to an Altivar 212 or 312?

It places the remote LCD keypad up to one metre from the drive, giving operators a clear view while keeping the RJ45 link within the drive’s recommended distance.

Which interface does the RJ45 connector use and what does it cap in practice?

The RJ45 plugs carry the Altivar keypad protocol, limiting the cable run to 1 m so signal integrity is maintained on ATV212, ATV312, ATV61 and ATV71 drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.