Schneider Electric
Schneider Electric RPM32BD Relay 3PDT 24V DC 15A 11-Pin
A 24 V DC plug-in relay with an 11-pin base, 3PDT contacts rated at 15 A and a built-in LED indicator
- TypeIndustrial Electrical Controls & Automation
- ColorTransparent
- 3PDT contact form gives versatile switching control
- 24 V DC coil voltage suits low-voltage panels
- 15 A rating at 250 V AC handles heavy loads
- Lockable push-to-test button simplifies diagnostics
- LED indicator plus mechanical flag show status instantly
Relay for 24 V DC control circuits
This Schneider Electric RPM32BD is a plug-in general-purpose relay with an 11-pin square base. It switches three pole double-throw contacts rated at 15 amperes for both 250 V AC and 28 V DC loads. The sealed transparent body includes an LED status indicator and a lockable push-to-test button for quick circuit verification.
Replaces worn plug-in relays in panels
When an existing 11-pin relay shows contact wear, coil failure or a missing indicator, this unit restores reliable switching without rewiring the socket. The upgrade is worthwhile when a visible LED and mechanical flag are needed for faster troubleshooting during maintenance windows.
Handles 15 A resistive loads on AC or DC
The contacts comfortably carry 15 A at 250 V AC or 28 V DC for lighting, heater or small motor circuits. They are not horsepower rated at 120 V or 240 V AC, so direct motor starting beyond fractional loads is outside the design envelope.
Highlights
- 3PDT contact form gives versatile switching control
- 24 V DC coil voltage suits low-voltage panels
- 15 A rating at 250 V AC handles heavy loads
- Lockable push-to-test button simplifies diagnostics
- LED indicator plus mechanical flag show status instantly
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color | Transparent |
Questions about this item
What socket or base accepts the 11 flat pins on this relay?
The relay uses an 11-pin plug-in base with 0.18 in flat pins; choose a square-base socket that matches this pin layout and 15 A rating.
How do you install the RPM32BD and what step is often missed?
Push the relay straight into the socket until the lockable push-to-test button clicks; the common miss is not fully seating the pins so the mechanical flag and LED indicator stay inactive.
When should the RPM32BD relay be replaced?
Replace the unit if the LED indicator fails to light, the mechanical flag does not move during the push-to-test, or contacts no longer carry 15 A at 250 V AC or 28 V DC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
