Schneider Electric
Schneider Electric RPM31F7 Relay 3PDT 120V AC 15 A 11 Pin
A plug-in 3PDT relay rated 15 A at 250 V AC or 28 V DC with an 11-pin quick-connect base and a mechanical flag indicator
- TypeIndustrial Electrical Controls & Automation
- ColorTransparent
- 3PDT contact form switches three circuits from one relay
- 15 A rating at 250 V AC handles demanding loads
- 120 V AC coil voltage matches common control circuits
- 11 flat pins with 0.18 in width suit standard sockets
- Lockable push-to-test button allows safe manual operation
Industrial Relay for 120 V AC Control Circuits
This Schneider Electric RPM31F7 is a plug-in general-purpose relay designed for 120 V AC coil operation. It provides three-pole double-throw switching in a square, enclosed body with a mechanical flag indicator. The unit suits industrial automation panels where quick-connect wiring and lockable push-to-test are required. It is not for circuits needing horsepower-rated contacts or DC coil voltages other than the rated 28 V DC contact limit.
Contact Form 3PDT at 15 A Decides Fit
The single specification that determines compatibility is the 3PDT contact form rated at 15 A for both 250 V AC and 28 V DC loads. An 11-pin flat-pin base with 0.18 in pin width matches standard square sockets. If your application requires a different pole count, contact rating, or pin layout, this relay will not fit the circuit design.
Enclosed Body and Lockable Test Button Aid
The sealed enclosure protects contacts from dust while the mechanical flag shows status at a glance. A lockable push-to-test button allows manual actuation without energising the coil, simplifying commissioning and troubleshooting. Quick-connect flat pins enable tool-free wiring changes. No software or additional accessories are included with the relay.
Highlights
- 3PDT contact form switches three circuits from one relay
- 15 A rating at 250 V AC handles demanding loads
- 120 V AC coil voltage matches common control circuits
- 11 flat pins with 0.18 in width suit standard sockets
- Lockable push-to-test button allows safe manual operation
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color | Transparent |
Questions about this item
What does the 15 A rating mean when the relay is installed in a control panel?
The contacts can switch up to 15 A at 250 V AC or 28 V DC, so the relay handles typical motor-starter or lighting loads without exceeding its rated current.
How does the 11-pin flat quick-connect interface limit the circuits I can wire?
Eleven flat pins spaced at 0.18 in carry three pole double-throw contacts plus coil connections, giving you three independent change-over circuits in a single plug-in base.
What panel cut-out or socket depth is needed for the 1.54 in body?
The square plug-in body measures 1.22 in wide by 1.06 in high and extends 1.54 in behind the mounting surface, so allow at least that depth in the enclosure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
